Fork Parts

20 mm Hex-lock through axle for Minute/Drake/Circus 2008+, Dorado 2009-2019
Also fits 2006+ Manitou Travis
Interchangable with 83-2966
Hex measures 21.7mm A/F non-disc side and 18.3mm A/F disc side.
Cap thread M14 x 1.0mm
Silver Colour with Black cap.

Manitou Part Code: 141-23995

Learn More

Air piston for Manitou 30mm forks. 
Including R7, M30 & Markhor
New design from 2020 using a quad-ring seal.

Manitou Part Code 141-33383-K001 Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 83-3305

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.  29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20 x 110mm through axle dropouts (axle not included)
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 141-23994-K036

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions. 29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.  (use 141-30643-K009 (black) for this application)
Quick Release Dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
Gloss Black colour.
Manitou Part Code: 83-3302

Learn More

Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294

NOTE:  This is not ABS+.  It does not use shim stacks and is not revalvable.

Learn More

Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144

Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006

Learn More

Minute/Marvel/Tower/Machete 2008+ 29" rebound damper assembly 80-120 mm
250 mm overall length, 215 mm steel tube
28.6 mm piston
072037 End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3295

Learn More

32mm rebound damper assembly 100-145mm.
Fits Machete JUNIT 24" 2019+, R7 Expert & Machete Comp 2021+

Manitou Part Code: 141-36683-K008 Learn More

Minute/Marvel/Tower/Machete 2008+ rebound damper assembly 80-140 mm
206 mm overall length, 170 mm steel tube
28.6 mm piston
White End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3341

Learn More

TPC compression damper assembly for 2008+ Minute/Tower/Drake etc
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3143

Learn More

Compression Rod for Tower/Minute 29" 120mm
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-29090-K004 Learn More

ABS+ Compression damper kit for Manitou M30 & Markhor forks.  Also fits R7 and some BLACK models.
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Lower priced alternative to R7 ABS+

Manitou Part Code: HB-141-32556-K001

Learn More

ABS+ compression damper kit to fit Manitou J-Unit Machete 20" forks.
Includes damper and plastic adjuster knob with retainer screws.
Comp level with pastic knobs and damper piston.
Shorter length than usual 32mm ABS+ dampers.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: J-unit Kids.  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-36683-K009 Learn More

ABS+ compression damper kit for Manitou R7, M30 & Markhor forks.
Fully tunable and revalvable.
25mm green piston and M26.5x1.00mm cap threads.

Manitou Part Code: 141-26532-K001

Learn More

Manitou Axel Trace 2006 air piston.
25.4 mm OD

Manitou Part Code: 85-5580 Learn More

Manitou Trade 2006 Knob Kit.
Will fit a variety of Manitou forks.
Comp knob 30mm OD with 8.8mm hex.  Reb knob 22.5 OD with 5mm int hex

Manitou Part Code: 83-5582

Learn More

Clamp block for Manitou Dorado 36 mm forks
4 holes, 8 mm, 10 mm, 22.23 mm & 26.50 diameter

Manitou Part Code: 172-25077 Learn More

Clamp block for servicing Manitou Dorado 2009+ forks
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
5 clamp sizes - 8 to 26.5 mm

Shockcraft Part Code:  SC-CLAMP-MAN-DORADO-V1 Learn More

Air spring compression rod & end cap assembly for Dorado forks 2009 onwards Fits 26" and 27" wheel sizes Manitou Part Number: 141-25983 Learn More

Rebound damper shaft, piston & end cap assembly for all Dorado forks from 2009 onwards Fits 26" and 27" wheel sizes Manitou Part Number: 141-24102 Learn More

Fits all Manitou Dorado from 2009 onwards 1.125" straight steerer tube Pro model has more machining and lighter weight than Expert crowns Manitou Part Code: 141-25987 Learn More