Fork Parts

We have 1x "2nd hand used" axel remaining, please contact us for further information.

20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
Black Colour
Manitou Part Code: 85-5070

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 83-3305

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.  29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20 x 110mm through axle dropouts (axle not included)
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 141-23994-K036

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions. 29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.  (use 141-30643-K009 (black) for this application)
Quick Release Dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
Gloss Black colour.
Manitou Part Code: 83-3302

Learn More

Shockcraft's internal seal kit for 32 mm Manitou Stance & Kingpin forks Learn More

Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294

NOTE:  This is not ABS+.  It does not use shim stacks and is not revalvable.

Learn More

Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144

Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006

Learn More

Minute/Marvel/Tower/Machete 2008+ 29" rebound damper assembly 80-120 mm
250 mm overall length, 215 mm steel tube
28.6 mm piston
072037 End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3295

Learn More

Minute/Marvel/Tower/Machete 2008+ rebound damper assembly 80-140 mm
206 mm overall length, 170 mm steel tube
28.6 mm piston
White End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3341

Learn More

TPC compression damper assembly for 2008+ Minute/Tower/Drake etc
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3143

Learn More

Compression Rod for Tower/Minute 29" 120mm
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-29090-K004 Learn More

2006 Gold Label Jump Coil Spring Ride Kit
108 lb/in Spring Rate
No paint, just black heat-shrink
Spring 255mm long , 24mm OD

Manitou Part Code: 83-2806 Image indicative only Learn More

2006 Gold Label Jump Coil Spring Ride Kit
80 lb/in Spring Rate
Yellow stripe with black heat-shrink
Spring 255mm long , 24mm OD

Manitou Part Code: 83-2805 Image indicative only Learn More

M8 Flanged foot bolt with o-ring
Fits a range of Manitou forks from 2008 Minute to current day
Included PU O-ring size -010

Manitou Part Code: 067892

Learn More

Full configurable service & upgrade kit containing fork seal kit, fork oil, bushing lubricant, grease, tools and upgrades
Fits all Manitou 32 mm forks from 2007-19 including Minute, Marvel, Circus (but not Circus Pro), Machete, Drake, Tower etc
TPC, SPV, ABS+, Lockout, Coil spring, TS Air, ISO Air etc

See Related Products for details on components of this service kit Learn More

Fork service kit containing fork seal kit, fork oil, bushing lubricant, Slickoleum assembly grease and oil syringe.

Fits all Manitou 32mm forks from the 2003 Sherman to current.  Including Minute, Marvel, Nixon, Stance, Circus (but not Circus Pro), Machete, Drake, Tower etc. Learn More

Fork service kit containing fork internal air and oil o-ring kit, wiper seals, fork oil, bath oil, grease and oil syringe
Optional upgrade & service parts available

Fits Manitou Mezzer Pro & Expert forks 2020+ Learn More

Gold Label 2006 Knob (Manitou)

Manitou Part Code: 85-4473 Learn More

Fluid Flow compression damper assembly for Gold Label Forks
Will also fit Sherman, 2005/6 Nixon and 2006 Minute
Non adjustable plastic plate with fixed size holes for damping
No knobs required.
Piston diameter approx 27 mm
Cap threads 1.125" x 18 TPI
Manitou Part Code: 83-2808

Learn More

Application: Manitou 32mm Forks 2007-19
Including Minute, Marvel, Circus, Drake, Tower, Argyle etc etc.
Kit includes o-rings & quad rings for ABS+ & TPC dampers with TS Air, ISO Air or Coil springs
Does not include foot seals used on later fork dampers (available separately here for these forks) and other parts which are in the full service kit bundle

PDF showing contents of kit is available here Learn More

Superseded by Manitou 32 mm Low Friction Fork Seal Kit
Kit includes 2 high quality Trelleborg seals and 2 foam rings.
Fits 32 mm stanchioned Manitou forks from 2003 to present.
Flanged type for 42mm pocket.

Manitou Part Code: 85-5293

Learn More

Damper internal seal kit for Manitou EFC, SX, SX-Ti, FS & FS-Ti forks 1996 to 1997 including Palmer Stroker

Learn More