You have no items in your shopping cart.
Tuning & Upgrade
-
Full service & tune pricing for Manitou Mattoc Pro Mezzer Pro with MC^2 damper
Includes labour, consumables and fluids
Optional wiper seals, repairs & upgrade parts
Available with Shockcraft's Stage2 Tune
The Stage2 Tune is our next level from Pick & Mix Self Tune with high flow base-valve piston
Learn More -
Manitou Mattoc Pro 2023 complete damper with Shockcraft Ready Mix Tune
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
Purchase this tuned damper for easy self-install in your Manitou Mattoc Pro 2023 fork Learn More -
Mattoc Pro 2023 complete fork with Shockcraft Ready Mix Tune
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
Learn More -
Service and tune pricing for Manitou McLeod & Mara Inline rear shocks
Includes labour, consumables (seals & fluids)
Optional air sleeve kit, eyelet bushings & Ready Mix Tune
Excludes additional repairs and repair parts
We can change travel or stroke of shocks during service and/or tune for an additional charge
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
Standard Service with air sleeve quad-rings (included in Consumables) - periodic damper service for shocks which have need an oil change but air-can is still clean inside
Standard Service with air sleeve kit - required when dirt or mud has pushed past the air-can wiper seals
Complicated Service with quad-rings or air sleeve kit - full service including resetting of shim preload. Air can seals depend on dirt ingress
Learn More -
Full service & tune pricing for Manitou Mezzer Expert
Includes labour, consumables and fluids
Optional wiper seals, repairs & upgrade parts
Available with upgrade to a Mezzer Pro MC2 damper & IRT
We can also provide the MC2 damper with Shockcraft's Ready Mix Tune
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
Learn More -
Full service & tune pricing for Manitou Mezzer Pro
Includes labour, consumables and fluids
Optional wiper seals, repairs & upgrade parts
Available with Shockcraft's Ready Mix Tune
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
Learn More -
Mezzer Pro complete damper with Shockcraft Ready Mix Tune
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
For Mezzer Expert upgrade the end-cap is necessary, the IRT is optional. Learn More -
Mezzer Pro complete fork (Matte Black colour) with Shockcraft Ready Mix Tune
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
Learn More -
Mezzer Pro complete fork (Matte Black colour) with Shockcraft Stage2 Tune
Stage2 Tune for the Manitou Mezzer & Mattoc Pro MC2 damper is Shockcraft's own in-house upgrade and tune, only available for install in our suspension workshop
This is the next level up from our Ready Mix Tuned Mezzer Pro, with high flow base-valve piston for increased sensitivity and bump control
Stage2 tuning gives you compression and rebound damping matched to your weight, bike, terrain and riding style
It includes custom high flow rebound and base-valve pistons with reshimmed compression and rebound damping Learn More -
Manitou Shock Travel Spacer 28 x 39 x 1.25 mm (Shockcraft)
US$2.47Out of Stock - Contact Us
1.25mm Spacer rings to reduce overall length and stroke of Manitou Mcleod, Mara & Mara Pro rear shocks
Install in air can above top out bumper.
Four spacers will reduce a 190 x 50 mm McLeod to 185 x 45 mm to fit Giant etc
Shockcraft Part Code: SPA-28x39x125PTFE Learn MoreOut of stock
-
Mara Air Can Volume Spacer Kit (Manitou)
US$28.36In Stock
Air Can Volume Spacer Kit
Fits all Manitou McLeod & Mara King Can (dual can) shocks.
Each ring is 1.15cc volum reduction
5 rings per kit.
Part number: 142-37512-K039 Learn More -
Mara SKF Flexible IFP (Manitou)
US$21.12In Stock
SKF Flexible IFP for Manitou Mara Shocks
For 24.3mm bore, 14mm tall.
Fits Mara metric inline and Pro piggy back shocks
Do not use on McLeod, insufficient internal space.
Manitou Part Code: 142-37512-K025 Learn More -
Mattoc IRT Upgrade Kit Fine Thread 2020+ (Manitou)
US$141.80In Stock
Manitou Mattoc IRT Upgrade Kit 2020+
Learn More
Adds a second air chamber for independent tuning of mid-end stroke.
Compatible with 2020+ Mattoc Pro, Mastodon Pro & Circus Pro can be fitted to Comp with a piston swap.
Installs with a cassette tool and uses a flatter cap than earlier versions
Manitou part code: 141-32668-K010 -
Upgrade your Mattoc Expert to Mattoc Pro specification.
Requires the Mattoc Pro rebound shaft assembly
Compression damping requires either the Mattoc Pro MC2 compression assembly or convert your Expert compression damper with the Pro HBO Cup.
27" wheel size for up to 160 mm travelManitou Part Codes: 141-30996-K017 (Rebound Assembly) & 141-30996-K001 (Compression Damper Assembly) or 126-30377 (Mattoc Pro HBO Cup)
Learn More -
Mattoc Travel Change Kit (Manitou)
US$29.75In Stock
Travel spacers & hydraulic-bottom-out (HBO) cones to convert Manitou Mattoc Pro from 26" to 27" or vice versa Includes instructions Does not fit Mattoc Expert, which uses larger diameter bottom out cones Manitou Part Code: 141-30159-K010 Learn More -
Mattoc/Magnum IRT Upgrade Kit (Manitou)
US$114.83Last One Left
IRT: Infinite Rate Tune
Adds a second air chamber for independent tuning of mid-end stroke.
Coarse thread M32x1.0mm for 2014-2019 Mattoc, Magnum, Mastodon Pro and Expert level forks.
Manitou Part Code: 141-32668-K003 Learn More -
Mattoc/Magnum IVA Upgrade Kit (Manitou)
US$70.90Last One Left
IVA: Incremental Volume Adjust
Learn More
A 5 position spacer system to tune positive air chamber volume and increase progression
M32 x 1.0 mm thread
Manitou Part Code: 141-32668-K001 -
McLeod & Mara Inline Remote Conversion Kit (Manitou)
US$90.32Last One Left
MILO (Manitou Integrated Lock Out) complete kit
Remote lever, cable & shock mounted cable-stop to convert Manitou McLeod or Mara Inline to remote compression adjustment
Lever included is two position. Can be used with other levers.
Manitou Part Code: 142-31535-K027 Learn More -
McLeod King Can Dual Air Can 190 x 50 mm & 200 x 50 mm (Manitou)
US$141.80Last One Left
King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Fits 190x 50 mm & 200 x 50 mm McLeod rear shocks Manitou Part Code: 142-31535-K030 Learn More -
McLeod King Can Dual Air Can 200 x 56 mm (Manitou)
US$141.80Backorder ex-USA
King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K032 Learn More -
McLeod King Can Dual Air Can 216 x 63 mm (Manitou)
US$141.80Last One Left
King can multi-volume air can Choose between medium or high volume with internal seal placement Direct fit on to McLeod rear shocks Manitou Part Code: 142-31535-K033 Learn More -
Manitou Mezzer Pro MC2 complete damper and end cap for upgrade of Mezzer Expert
IRT is optional
Available with Shockcraft Ready Mix Tune
The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you
This tuning system gives you compression and rebound damping matched to your weight, bike, terrain and riding style. It includes a custom high flow rebound piston and reshimmed compression and rebound damping Learn More -
Mezzer IRT Upgrade Kit (Manitou)
US$141.80Last One Left
For upgrade of Mezzer Expert or repair on Mezzer Pro
Adds a second air valve and air chamber for tuning last half of the stroke.
Manitou Part Code: 141-36713-K021 Learn More -
Mezzer M35x1.0 Cartridge End Cap (Manitou)
US$18.50In Stock Now
Manitou Mezzer M35x1.0 Cartridge End Cap
Provides bottom-out bumper interface on Mezzer Pro forks
Required when upgrading Mezzer Expert to Pro damper
Manitou Part Code: 128-35666 Learn More -
MILO (Manitou Integrated Lock Out) Kit for ABS+ Fork Damper (Manitou)
US$90.32Last One Left
MILO (Manitou Integrated Lock Out) kit for ABS+ damper used in 2011+ forks
Learn More
Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, ABS+ damper cap and screw
Will adapt any ABS+ fork damper to remote (handlebar) lockout operation
Manitou Part Code: 141-26896
Tuning & Upgrade
Shop By
Shopping Options
- Fork Model
-
- 888 from 2008 (38 mm)
- ABS+ Damper
- Axel
- Black
- Black/Skareb
- Circus
- Dorado
- Drake
- Kwik Toggle Damper
- M30
- Machete
- Machete JUnit
- Magnum
- Manitou 32 mm Forks
- Manitou 34 mm Forks
- Manitou Forks
- Manitou Single Crown Forks
- Markhor
- Marvel
- Mastodon
- Mattoc
- Mezzer
- Minute
- Nixon
- R7
- Sherman
- Slate
- Splice
- Tower
- TPC Damper
- Travis
- Universal
- Dropper Post Model
- Rear Shock Model
- Activity
- Wheel Size
- Fork Steerer
- Fork Axle
- Fork Travel
- Shock Length
- Shock Stroke
- Shock Head Style
- Shock Type
- Climb Switch/Lockout
- Bushing Type
- Bushing Internal Diameter (ID)
- Bushing Outside Diameter (OD)
- Bushing Length
Recent Posts
-
MRP Launched their new Lift fork damper in April this year. It's... -
Good suspension should be stable and supportive while being planted, y... -
Deans Bank 6 Hour, Wanaka Bike Wanaka is back with their Deans Bank r...
Categories
Instagram
