Dropper Post Parts

Can be trimmed down in length to replace the lower sliding bushing in Reverb seat-posts Learn More

Clamp block for servicing RockShox Reverb dropper Posts
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
4 clamp sizes - 7 to 31.6 mm

Shockcraft Part Code:  SC-CLAMP-RS-REVERB-V1 Learn More

Barb Connector tool for Rock Shox Reverb Stealth hose.
Screws between two hoses to pull them through the frame
Will work with many brake hoses too.
2.5mm threaded ends, 5mm OD.

SRAM Part Code:  00.6815.066.030

Learn More

Full mineral oil bleed kit For all RockShox Reverb dropper posts Kit includes 120 ml hydraulic fluid, two syringes and tubes with M5 fittings SRAM Part Code: 00.4318.007.001 Learn More

Fits Reverb and X-Lock hoses at lever end.

SRAM Part Code: 11.6815.022.030 Learn More

Remote service kit for Reverb 1X Remote & Reverb AXS (2020+)
Includes boot, paddle & barb

SRAM Part Code: 11.6818.048.000 Learn More

Fits RockShox Reverb B1 & Reverb Stealth B1 (2017-19) seatposts
Includes replacement foam silencer, lower bushing & 2 o-rings

SRAM Part Code:11.6818.051.007 Learn More

Fits RockShox Reverb A1 seat posts (not Reverb Stealth)
SRAM Part Code: 11.6818.003.010 Learn More

Application: RockShox Reverb A1, A2 and B1 Stealth & Non-Stealth
This comprehensive seal kit includes all o-rings that need replaced during a service

PDF showing contents of internal seal kit is available here

Learn More

Fits Reverb A2 dropper posts
Non stealth models with external hose.
Includes new seal heads, bushings, internal seals and  upgraded IFP

SRAM Part Code: 11.6818.031.005

Learn More

Rockshox Reverb & Stealth lower bushing.
Single bushing with o-ring to fit Reverb Reverb Stealth dropper posts
Installs into cartridge end-cap for service or repair.

SRAM Part Code: 11.6818.035.007 Learn More

Rockshox Reverb & Stealth cartridge end-cap.
Coarse thread version for A1 and A2 models.
Fits RockShox Reverb & Reverb Stealth up to 2016 (A1 & A2)
Includes inner and outer seals with lower bushing.

SRAM Part Code: 11.6818.017.020 Learn More

Connectamajig collar
Fits remotes for Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.4318.005.000 Learn More

Kit with internal seals, oil, grease, tools & lower bushing to service RockShox Reverb and Reverb Stealth seat posts

Comprehensive internal seal kit includes all o-rings that need replaced during a service
PDF showing contents of internal seal kit is available here
Alternative to obsolete SRAM kit 11.6815.031.000
A1 Reverb uses 9.1 x 3.5 mm o-ring for main shaft seal
A2 & B1 replace 10x15 x4 mm cup seal on main shaft with 10 x 3 mm o-ring (included in kit) to reduce air intrusion

Lower bushing is either genuine RockShox glacier type or IGUS, which needs trimmed to fit

Click on related products below for detail on tools

Learn More

Fits RockShox Reverb Stealth seat posts
Includes hose with crimped on Connectamajig fitting and barb fitting for the lever end
Hose length 2000 mm

For non Connectamajig posts use 11.6815.025.030

SRAM Part Code: 11.6815.025.030 Learn More

Fits all Reverb & Reverb Stealth dropper posts
SRAM Part Code: 11.6815.022.010 Learn More

Rockshox Reverb Hose Kit.
Fits all RockShox Reverb & Reverb Stealth dropper posts
Includes new hose, strain relief & barb end fittings
Hose length 2000 mm

For Connectamajig use 11.6815.025.030

SRAM Part Code: 11.6815.025.010 Learn More

120 ml hydraulic fluid bottle for all RockShox Reverb dropper posts. Learn More

Alternative product: RockShox Reverb IFP Height Tool 210 mm

SRAM Part Code: 00.6815.066.040 Learn More

RockShox Seat Post Internal Floating Piston Height Tool (210mm Length)
Reverb AXS / Reverb A1 - B1 / Reverb Stealth A2 - C1

SRAM Part Code: 00.6818.043.000 Learn More

Replacement IFP for Rockshox Reverb dropper posts.
Backwards compatible to all Reverb models, A1, A2, B1 and C1/AXS

SRAM Part Code:  11.6818.053.001 Learn More

Rockshox Reverb & Reverb Stealth hydraulic hose and lever.
Includes push button remote & spare hose barb fittings.

Hose end not compatible with Connectamajig.

SRAM Part Code: 11.6815.026.050 Learn More

Bleed fitting for Rockshox Reverb Seat Posts.
Fits Stealth and Non-Stealth (external hose) versions
Used for bleeding & setting oil depth for the internal hydraulics.

SRAM Part Code: 00.6815.066.020

Learn More

Fits Reverb Stealth A2 dropper posts
Includes new seal heads, bushings, internal seals and  upgraded IFP
Replaces SRAM-11.6818.022.020

SRAM Part Code: 11.6818.031.004 Learn More

RockShox Reverb Stealth B1 400 Hour 2 Year Service Kit (SRAM)
Includes bearing/seal heads for post and cartridge along with internal seals.

SRAM Part Code:  11.6818.031.001 Learn More