Shock Hardware

Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 21.8 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks

X-Fusion Part Code: 42-XRKBU06218-101 Learn More

Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 22.2 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks

X-Fusion Part Code: 42-XRKBU06222-101 Learn More

Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 21.8 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks

X-Fusion Part Code: 42-XRKBU08218-101 Learn More

Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 22.2 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks

X-Fusion Part Code: 42-XRKBU08222-101 Learn More

Bearings and spacers to fit bearing eyelets of RockShox Deluxe & Super Deluxe 2017+ rear shocks

SRAM Part Code: 11.4118.046.000 Learn More

Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 20 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks

X-Fusion Part Code: 42-XRKBU08200-101 Learn More

Shock trunnion bolt kit to fit Trek Fuel, Remedy, Rail and Slash Bikes
Works with our Deaktiv Shock Pin Kits

Kit includes 4x Trek spacers (select size required for your frame), 2x Trek Trunnion M10 x 16 mm bolts and 2x Heavy Duty M10 Bolts
See Related Products for details on each part or to purchase separately

Note picture shows older version of our Heavy Duty M10 bolts, see new version as shown here Learn More

Shock Hardware Kit - 8 x 36 mm, 9 piece (FOX)

8 mm bolt hole, 1.417 inch (36mm) total width
Contains one pair of flanged polymer bushings, aluminum pin, four collars and o-rings.

Ref 214-09-041 FTW 843149
Fox Part Code: 803-03-313 Learn More

X-Fusion Flanged bushings for shock eyelets
Straight replacement for genuine Fox flanged bushings provided the pin isn't worn
Installed as a pair with o-rings (not included) for repair

If you have a worn pin causing a knock, then use the green versions which have a tighter ID

Learn More

Shock Hardware Kit - 1/2" (12.7 mm) x 8 mm x 40 mm, Fox 9 piece
8 mm bolt hole, 40 mm 1.575") total width

Contains one pair of flanged polymer bushings, aluminum pin, four collars and o-rings.

Ref 214-09-045
FTW 1095786
Fox Part Code: 803-03-336

Note - image is representative only Learn More

Fits Manitou rear shocks with 1/2" ID eyelets (including McLeod, Radium, Revox & Swinger etc 2007 & later)
21.8 mm total width 8 mm bolt hole
Two piece top-hat design
Manitou Part Code: 142-27125-K003 Learn More

Custom Hardware and shock stroke modification to fit a Manitou Mara Inline to a Trek Remedy or Slash with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
This conversion allows fitment of a Manitou Mara Inline 230 x 60 or 65 mm air shock
Optional travel reduction on the shock to 57.5 mm and fitting custom shock pins.

Resulting combination bolts straight in.

Learn More

Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Remedy 2019-21 & Slash 2018-20 in place of a Thru-Shaft Reaktiv shock.
2019-2021 Remedy & 2018-2020 Slash Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with upper 54 mm pin and lower 50 mm offset pin.
Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring.
We can change the stroke on this shock from 0-65 mm.

Resulting combination bolts straight in.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability.

Tuning for your weight and riding style is also available - details here

Learn More

Three piece shock hardware.
12.7mm (1/2") pin
8mm bolt hole
54mm total width
Black anodised aluminium.
Works with DU bushings.

SRAM Part Code:  11.4115.012.290 Learn More

Contact us for alternative options

Cane Creek DB Coil Rear Shock for Giant Reign
Trunnion Mount top (54 mm wide, M10 x 1.0 threaded holes)
Open lower eyelet (no bushing) to fit Giant main pivot
205 mm eye to eye length 62.5 mm stroke
9.5 mm shaft
Fits Giant Reign 2018+
Spring included - select your rate (use our spring calculator to work out spring rate) Learn More

Cane Creek Kisuma Coil shock with custom hardware to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
2018-2020 Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion pins, Cane Creek Kitsuma 230 x 57.5 mm coil shock and coil spring

Resulting combination bolts straight in

Learn More

Conversion kit to fit a Marzocchi Bomber CR Coil shock to a Trek Rail.
Rail Reaktiv shocks are 230 x 57.5 mm air spring with 40mm lower trunnion hardware
Product includes Lift Kit with conversion pin, Marzocchi Bomber CR 205 mm trunnion shock and coil spring

Resulting combination bolts straight in.  The lift kit keeps the piggy back clear of the down-tube.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Shock Hardware Kit - 8 x 20 mm, 5 piece (FOX)

8 mm bolt hole, 0.787 inch (20 mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref  214-09-043  FTW 169558

Fox Part Code;  803-03-236 Learn More

Shock Hardware Kit - 6 x 21.85 mm, 9 piece (FOX) 6 mm bolt hole, 0.86 inch (21.84mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-08-006 FTW 793134 Fox Part Code: 803-03-258 Learn More

Shock Hardware Kit - 8 x 22.2 mm, 7 piece (FOX)

8 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.

Ref 214-09-007 FTW 787390
Fox Part Code; 803-03-280


Photo of prior model. Fitment identical. Learn More

A pressing service using our custom tools which remove and install bushings and bearings without damage to your shock.   If you'd like us to replace the bushings in your rear shock eyelet, click Book Now.  You can select just shock eyelet pressing or other service options.  You will receive a job number and details of where to send your rear shock.

Note there is no charge for shock eyelet pressing if completed during a Shockcraft service.

Learn More

Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Slash 2021+ in place of a Thru-Shaft Reaktiv shock
2021+ Slash uses a 230 x 62.5 mm shock with 54 mm top and 40 mm lower centred hardware
Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring

If using a Marzocchi Bomber CR 230 x 60 mm no additional spacers/labour required to fit but you will lose some travel
If using a Marzocchi Bomber CR 230 x 65 mm then a stroke reduction is required with shock head removal & re-gas

We can change the stroke on this shock from 0-65 mm

Resulting combination bolts straight in

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Shock Hardware Kit - 10 x 22.2 mm (FOX)

10 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.

Ref 214-11-001 FTW 779690
Fox Part Code; 803-03-317

Learn More

Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy Custom fitted in our workshop to your shock's individual eyelet tolerances Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and standard IGUS bushing For pin widths 25 mm and greater both sealing collars and spacers are used Allow 7 days lead time after receipt of shock Learn More