Fitted Shock Hardware

Shock hardware custom fitted in our workshop to your shock's individual eyelet tolerances. Widths from ~16mm on up. Virtually any diameter and bolt hole possible. Includes stainless steel pin with plastic collars and standard IGUS bushing Allow 7 days lead time after receipt of shock Learn More

Custom Hardware and shock stroke modification to fit a Manitou Mara Inline to a Trek Remedy or Slash with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
This conversion allows fitment of a Manitou Mara Inline 230 x 60 or 65 mm air shock
Optional travel reduction on the shock to 57.5 mm and fitting custom shock pins.

Resulting combination bolts straight in.

Learn More

Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Remedy 2019-21 & Slash 2018-20 in place of a Thru-Shaft Reaktiv shock.
2019-2021 Remedy & 2018-2020 Slash Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with upper 54 mm pin and lower 50 mm offset pin.
Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring.
We can change the stroke on this shock from 0-65 mm.

Resulting combination bolts straight in.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability.

Tuning for your weight and riding style is also available - details here

Learn More

Contact us for alternative options

Cane Creek DB Coil Rear Shock for Giant Reign
Trunnion Mount top (54 mm wide, M10 x 1.0 threaded holes)
Open lower eyelet (no bushing) to fit Giant main pivot
205 mm eye to eye length 62.5 mm stroke
9.5 mm shaft
Fits Giant Reign 2018+
Spring included - select your rate (use our spring calculator to work out spring rate) Learn More

Cane Creek Kisuma Coil shock with custom hardware to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
2018-2020 Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion pins, Cane Creek Kitsuma 230 x 57.5 mm coil shock and coil spring

Resulting combination bolts straight in

Learn More

Conversion kit to fit a Marzocchi Bomber CR Coil shock to a Trek Rail.
Rail Reaktiv shocks are 230 x 57.5 mm air spring with 40mm lower trunnion hardware
Product includes Lift Kit with conversion pin, Marzocchi Bomber CR 205 mm trunnion shock and coil spring

Resulting combination bolts straight in.  The lift kit keeps the piggy back clear of the down-tube.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Custom Hardware for fitting a Marzocchi Bomber CR Coil shock to a Trek Slash 2021+ in place of a Thru-Shaft Reaktiv shock
2021+ Slash uses a 230 x 62.5 mm shock with 54 mm top and 40 mm lower centred hardware
Product includes conversion pins, DU Bushings, Marzocchi Bomber CR 230 x 60 mm OR 230 x 65 mm coil shock and coil spring

If using a Marzocchi Bomber CR 230 x 60 mm no additional spacers/labour required to fit but you will lose some travel
If using a Marzocchi Bomber CR 230 x 65 mm then a stroke reduction is required with shock head removal & re-gas

We can change the stroke on this shock from 0-65 mm

Resulting combination bolts straight in

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Custom Hardware for fitting a Manitou Mara Inline Air shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and Manitou Mara Inline 230 x 60 mm

Resulting combination bolts straight in.  The Manitou Mara Inline in stock form has firm 4 stage compression damping and is suited to XC style riding.  We recommend a piggy back shock for more aggressive riders (Mara Pro).  Tuning for your weight and riding style is also available.

Please contact us to confirm availability

Learn More

Manitou Mara Pro Gen2 Air shock with conversion kit to fit a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Mara Pro Shock, Shockraft Lift Kit with conversion pin.
Optional tuning and heavy duty bolt kit.

Resulting combination bolts straight in.  The Manitou Mara Pro has adjustable HS & LS comprssion and is suited to all riding styles.  Tuning for your weight and riding style is also available - details here

Please contact us to confirm availability

Learn More

Conversion kit & modifications to fit a Marzocchi Bomber CR 230mm Coil shock to a Trek Rail.
Rail Reaktiv shocks are 230 x 57.5 mm air spring with 40mm lower trunnion hardware
Product includes Shock piggyback shortening, stroke change and Deaktiv Pin pin.
Shock is optional or customer supplied.

Resulting combination bolts straight in.  The stroke reduction and modifications keep the piggy back clear of the down-tube.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy Custom fitted in our workshop to your shock's individual eyelet tolerances Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and standard IGUS bushing For pin widths 25 mm and greater both sealing collars and spacers are used Allow 7 days lead time after receipt of shock Learn More