Making power is easy. Making power with the right feel, that was Hayes' challenge. Hayes did this by creating an all new system.
Dominion’s master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design. It features a cold-forged caliper and KingPin structural pad retention bolt.
With a motorsports inspired Two-Stroke dual port bleed system, industry leading DOT5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance and easy maintenance.
Dominion A4 features the proprietary QuickBite2 system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat, with less braking noise.
Update 27/02/2025: Limited stock incoming from USA. Pre-order now. Contact us for ETA.
Limited edition Purple Hayes are back - the original Hayes A4 Dominion with purple levers & caliper
Purple Hayes pays homage to the legendary Purple Hayes from 2000
It links over 2 decades of brake development back to the original Hayes Disc Brakes, which are still competitive today
To celebrate such a fantastic ride and a quarter century of moulding the definition of fantastic braking performance for mountain biking, Hayes has produced a limited run of the highest performing brake to date, the Dominion A4
Each end has a longer (180 cm) hose for use on front or rear
Piston caliper with cross-hair alignment
Flippable lever with tooled reach adjustment
Dead stroke is factory set
Lifetime Leak-Proof Warranty - covers master cylinder and caliper
Pre-bled
Uses DOT 5.1 fluid
Fits 74 mm post mount brackets and adapters
Works best with Hayes D series rotors
Stock brake hose is 5.5 mm diameter
For frames requiring a smaller diameter or longer hose we have the Jagwire brake hose (5 mm diameter, 3 metre length) & adapter option available
One 3 m Jagwire brake hose & quick-fit adapter kit is enough for one bicycle (brakes front & rear)
As low as NZ$0.00
From NZ$495.00
To NZ$619.15
From NZ$495.00
To NZ$619.15
As low as NZ$125.50
203 mm (8") Rotor D series for Hayes Dominion
Designed to minimise noise making harmonics
Works with all Hayes brakes
6 bolt mounting
Supplied with T25 mounting screws & T25 wrench
Hayes Part Code: 98-36153-K001
180 mm (7") Rotor D series for Hayes Dominion
Designed to minimise noise making harmonics
Works with all Hayes brakes
6 bolt mounting
Supplied with T25 mounting screws & T25 wrench
Hayes Part Code: 98-36153-K002
160 mm (6") Rotor D series for Hayes Dominion
Designed to minimise noise making harmonics
Works with all Hayes brakes
6 bolt mounting
Supplied with T25 mounting screws & T25 wrench
Hayes Part Code: 98-36153-K003
Allows fitment of Shimano Ispec II shifters to Hayes brakes
Hayes Part Code: 98-36137-K001
Replacement pads for Hayes Dominion A4 brakes with 4 piston calipers
T100 sintered metallic compound for excellent life, power and fade resistance
Hayes Part Code: 98-36141-K001
Replacement pads for Hayes Dominion A4 brakes with 4 piston calipers
T106 semi metallic compound for quiet performance
Hayes Part Code: 98-36141-K002