Fox 36

Shaft clamp tool for use in installation of Luftkappe & Secus

Learn More

12 mm Crush Washer
16mm OD, 2.3mm thick.
Fits Fox forks.

Sold indvidually. Learn More

30 ml Oil Syringe - for fork filling & brake bleeding Learn More

8 mm Crush Washer
11mm OD, 1.6mm thick.
Fits Fox, Rockshox & other forks.

Sold indvidually. Learn More

Fox 36 Float NA2 2018-2021+ air shaft assemblies
Use for repair or travel change
Fit F36 Float 2018-2021+ forks with NA2 air system and 1.287" (32.7 mm) stanchion ID (except e-bike only shafts which have ID 1.214")
The 2021+ shafts are longer (bigger negative chamber) than the 2018-20 air shafts

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fox Part Code: 820-09-023-KIT Learn More

Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance.  Cures issue of friction and stiction to improve small bump control.  Also reduces break-in time of a new fork to zero.
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.

Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

Learn More

Motorex 2.5 wt fork oil - 15 cSt @ 40°C

Available in 250 ml or 1 L bottles
Refill Bottles - also available in refill bottles here

Learn More

Motorex 4 wt fork oil
16 cSt @ 40°C

Fox Racing Shox use Motorex 4wt oil in its MY21 DHX2 and FLOAT X2 shocks

Available in 250 ml or 1 L bottles
Refill Bottles - also available in refill bottles here

Learn More

Try our simple fork oil selection charts to find out which oil you need for your brand of fork, terrain, climate and riding. Learn More

Fork service kit for Fox F36 GRIP & GRIP2 forks 2018-2020 with NA2 EVOL air springs.
Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More

Fork service kit for Fox F36 GRIP & GRIP2 forks 2021+ with NA2 EVOL air springs.
2021 fork has a new chassis from previous with longer air-shafts and a new GRIP2VVC damper.
Kit is configurable to have wiper seals, all internal seals, oil, tools and upgrades. Learn More

Fork service kit for F32, F34, F36, F38 & F40 forks 2016+ using FIT4 (CTD, RC2), GRIP or GRIP2 dampers.
Kit contains SKF or Fox OE fork seal kit, Shockcraft internal air seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool.  See Related Products for details on each kit component.

This kit replaces the Fox 5wt teflon oil in GRIP dampers and lower legs with Motorex 2.5 wt and Supergliss on the air-side.  Motorex 2.5 wt oil is the same viscosity as Fox 5 wt but more slippery.  FIT4 dampers use Supergliss in both sides of the lower legs.

See Related Products for details on components of this service kit Learn More

Permanent repair of creaking and ticking noises from fork crowns.  Also improves fork stiffness.  Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for safe and permanent creak repair.

Note that damaged crowns will be rejected.  This is not a repair for parts stretched or bent.

Pricing depends on whether we receive a stripped Crown Steerer Unit (CSU) only or a whole fork.  If you send a whole fork we need to strip and rebuild it.sembly. 
Forks with cartridge dampers (e.g. Fox FIT/GRIP/GRIP2/CTD, RockShox Charger, Manitou MC2 or Mezzer) require a minimum of a Lower Leg & Air Spring Service. 
Forks with in-leg or open bath dampers (e.g. Fox open bath, RockShox all except Charger, Marzocchi Z2) require a minimum of a Standard Service.  The service labour pricing provided excludes additional repair.  Parts, oil and freight are additional and vary depending on the brand & model and the problems found.

Available immediately for RS Zeb, RS Yari/Lyrik 35 mm, RS Pike 35 mm, RS 32 mm Fox 38 mm, Fox 36 mm, Fox 34 mm, Fox 32 mm Manitou 37, 34, 32 and 30 mm, MRP Ribbon 35mm  forks and more.  New sizes have a slight delay as we design and manufacture tooling.

Learn More

Replacement of individual Stanchion or Steerer Tubes in fork crowns.  Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for repair.
Note that damaged crowns and tubes will be rejected. 

Shockcraft Part Code:  LBR-FORKTUBESWAP

Learn More

SKF Low Friction Flangeless Fork Seal kit for Fox 36 mm and Marzocchi Z1 2019+ forks
These flangeless seals have the same fork compatibility as the flanged option
Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
We recommend the use of a seal press tool for installation

Learn More

Fox Service Set 2021 36 GRIP2 Cartridge - 180mm VVC HSR / LSR / HSC/ LSC (Fox)
Also fits Marzocchi Z1 2019+ forks
Complete damper assembly with adjuster knobs for repair, upgrade or tuning

Available stock or with Shockcraft tuning

Fox Part Code:  820-18-335-KIT

Learn More

Air spring volume spacer for Fox 34 forks
Also E bike F36 forks have thicker wall stanchions and use F34 volume spacers
Green colour
10 cc volume each
Fox Part Code: 234-04-953 Learn More

Air spring volume spacer for Fox 36 forks
Note that E bike F36 forks have thicker wall stanchions and use F34 volume spacers
Orange colour
10 cc volume each
Fox Part Code: 234-04-736

Learn More

Air spring volume spacer for Fox 40 forks
Red colour
10 cc volume each

Fox Part Code: 803-01-669

Learn More

Hot Oil Pink 250 cc for rear shocks and fork cartridge dampers
14 cSt @ 40°C

Learn More

Vorsprung Luftkappe air piston with higher volume negative
Fits 2018+ Fox Float 36 Evol Performance & Factory Series forks
Requires roll pin tool to install
Can be installed as part of any Shockcraft service (book here)

Learn More

Double ended tool for pressing wiper seals into 35 or 36 mm stanchioned forks
Works with both flanged and flangeless wiper seals
Designed & tested to work with SKF flangeless seals
Keeps seals straight and sets depth flush with top of fork casting in one hit
Prevents damage to seals and forks

Manufactured by Real World Cycling (RWC) Learn More

0 to 300 psi Manitou Part Code: 85-4162 Learn More

15 ounce tub of Slickoleum assembly grease Learn More