Language
Toggle Nav 
Manitou Dorado 2004-05 (32 mm)
The 2004 Dorado increased stanchion diameter to 32 mm and with the MRD X-Works version increased travel to 200 mm. The SPV damper was also introduced. These models continued through 2005 until replaced by the Manitou Travis series.
Fork Details & Identification:
Brand |
Manitou |
Stanchions |
32 mm aluminium Gold anodised |
Model |
|
Crown & Uppers |
Carbon Fibre Upper tubes, black aluminium crowns 40mm uppper clamp 49.5mm lower clamp |
Release Year/s |
|
Decals |
Various |
Damper |
|
Wheel Size |
26 x 3.0" 690 mm max |
Spring |
Two stage coil spring on both sides |
Configurations & Travel |
DH 26" 180 mm MRD 26" 200 mm |
Fitment Options |
|
Stem |
|
Updates Since 2002 |
IFP modification to replace foam compensator in damper in TPC version |
Upgrade Compatibility |
|
Fluids:
Stock |
Motorex 2.5 wt fork oil in damper - bleed to full via rebound needle Motorex Prep M grease for fork bushings and seals Motorex Prep M grease for coil springs |
Shockcraft Recommended |
Motorex 2.5 wt fork oil damper - TPC bleed to full via rebound needle. SPV Bleed to full on cap before pressuring bladder via valve. Slickoleum - bushings, seals and coil springs |
-
![]()
20 x 110 mm Through Axle Sherman/Nixon/Gold-Label 2003-2008 (Manitou)We have 1x "2nd hand used" axel remaining, please contact us for further information.
Learn More
20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
Black Colour
Manitou Part Code: 85-5070NZ$69.52 -
![]()
32 mm Low Friction Fork Seal Kit (Manitou)Fits 32 mm stanchioned Manitou forks
Flangless type for 32 x 42 mm pocket
Require a seal driver to install
Kit includes 2 low friction SKFseals, 2 foam rings and Slickoleum grease
Special compound for low friction & extreme low temperature performance
Would suit; R7, Machete, Circus, JUNIT, Marvel, Match, Minute
Also fit older 32 mm forks - Nixon & Shermans
Manitou Part Code: 141-38117-K016
This kit supersedes 85-5293
Learn MoreNZ$65.00 -
![]()
-50%Dorado DH 2004-05 Compression Rod (Manitou)Regular Price NZ$182.16 Special Price NZ$91.08 -
![]()
Dorado DH 2004-05 Medium Ride Kit (Manitou)Medium ride kit for Dorado DH 2004-05
2x coil springs, 244 mm length, 32 mm OD
Rate: Medium, 20 lb/in each
Manitou Part Code: 83-2163 Learn MoreNZ$41.99 -
![]()
-50%Dorado MRD 2004-05 Compression Rod (Manitou)Regular Price NZ$252.67 Special Price NZ$126.34 -
![]()
Dorado MRD 2004-05 Firm Ride Kit (Manitou)Firm ride kit for Dorado MRD 2004-05
2x coil springs, 290 mm length, 32 mm OD
Rate: Firm, 23.5 lb/in each
Manitou Part Code: 85-5939 Learn MoreNZ$72.52 -
![]()
-50%Dorado MRD 2004-05 SPV-E Damper (Manitou)Dorado MRD 2004-05 SPV damper shaft assembly
Learn More
410 mm overall length, 275 mm steel tube, 27.5 mm piston
Aluminium End-Cap with 1.125" 18 TPI thread
Evolve type with bleed hole through rebound check valve & blue piston glide ring.
Manitou Part Code: 85-5931Regular Price NZ$407.50 Special Price NZ$203.75 -
![]()
Fork Oil 2.5 wt (Motorex)Motorex 2.5 wt fork oil - 15 cSt @ 40°C
Learn More
Available in 250 ml or 1 L bottles
Refill Bottles - also available in refill bottles hereAs low as NZ$16.15 -
![]()
Fork Oil 4 wt (Motorex)Motorex 4 wt fork oil
Learn More
16 cSt @ 40°C
Fox Racing Shox use Motorex 4wt oil in its MY21 DHX2 and FLOAT X2 shocks
Available in 250 ml or 1 L bottles
Refill Bottles - also available in refill bottles hereAs low as NZ$16.15 -
![]()
Fork Oil Selection ChartsTry our simple fork oil selection charts to find out which oil you need for your brand of fork, terrain, climate and riding. Learn MoreNZ$0.00 -
![]()
Fork Service Labour PricingThe nature and cost of service depends on the specific suspension model, it's unique issues and prior maintenance schedule. Model specific pricing is available from our Pricing page by selecting your fork model. If your model is not included please see pricing below.
Learn More
If you're not sure what type of service is required please contact us or we can make a recommendation after inspection of the fork. Repair work is additional to a normal service. We will always call and discuss before proceeding with any repair work.
These rates are for labour only and exclude repair.
Parts, oil & freight are additional and vary depending on the brand & model and the problems found.From NZ$30.00
To NZ$855.00
-
![]()
-
![]()
-
![]()
-
![]()
Slickoleum Assembly Grease Tube 5 g5 g tube with lid of Slickoleum assembly grease Learn MoreNZ$7.70
Manitou Dorado 2004-05 (32 mm)
Shop By
Shopping Options