Manitou Mara GEN 1 Inline

Designed for the riders that do everything, the Mara is ready for anything
Manitou's IPA damper features four different compression positions ranging from an open mode ready to smash rocks to a firm platform mode for those hard climbs and all out sprints
Made with 7050 aerospace-grade aluminum the chassis is both lightweight and durable
Imperial Eyelet, Metric & Trunnion sizes available up to 65mm stroke.

Ready Mix Tune - Targeted Tuning
Available with optional Shockcraft Ready Mix Tune.  The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you.  With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness.  The shock will be stable, supportive and suck up the bumps.  You'll notice huge changes in feel, speed and confidence.  There is also a choice of Trail tune for incremental compression or XC tune with firm lockout.

Note on Shock Availability:
The Mara Inline Generation 1 shocks (excluding Imperial sizes) are on run-out pricing.  Sizes available as shown.

Shock Stroke Change
There is no charge for stroke change for stock Mara Inline stroke sizes.  e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke.

Shock Length Modification
We also change shock length of new Mara Inlines at no additional charge.  e.g. we can change a 190 x 50 mm to 185 mm x 45 mm. Learn More

SKF Flexible IFP for Manitou Mara Shocks
For 24.3mm bore, 14mm tall.
Fits Mara metric inline and Pro piggy back shocks
Do not use on McLeod, insufficient internal space.

Manitou Part Code:  142-37512-K025 Learn More

Valve Core Removal Tool
Screwdriver type for removing schrader valve cores.
Works on forks, shocks and schrader tyre valves.

Shockcraft part code:  T-SCHRADER-CORE Learn More

Air Can Volume Spacer Kit
Fits all Manitou McLeod & Mara King Can (dual can) shocks.
Each ring is 1.15cc volum reduction
5 rings per kit.

Part number: 142-37512-K039 Learn More

Manitou Mcleod & Mara travel spacer kit
Contains 5 mm aluminium anti-rattle spacers for 10 mm inline and 12 mm Pro shocks
Contains 2.5 mm plastic spacers for 10 mm inline and 12 mm Pro shocks.

Manitou Part Code:  142-37512-K042

Learn More

Rockshox fork & shock pump 600 psi max (SRAM)

SRAM Part Code:  00.4315.023.030 Learn More

Book your demo of a new Manitou Mezzer fork and/or Manitou Mara Pro/Inline rear shock, with Hayes Dominion A4 front brake.
Simply add this product to your cart and proceed through to checkout to book your demo and confirm your address details.  We will add you to the queue for demo and advise ETA.

For our existing and trusted customers there is no fee for demo.
For new customers the demo fee is refundable upon return of the demo fork, rear shock & brakes in good condition or can be used towards purchase of a new Manitou Mara, Mezzer or Hayes Dominion brakes.

Fitment wise, the fork requires a tapered head-tube and boost front wheel.  The brake requires a 6 bolt disc hub (i.e. not Shimano centre-lock).  A 203 mm disc rotor and brake adapter are supplied.  For demo the Manitou Mara Pro is available as 210 mm i2i Length x 50 mm Stroke or 216 x mm i2i Length x 63 mm Stroke.  On purchase there is the option to add/remove spacers from the Maras to change the stroke.  For example, the 210 x 50 mm Mara Pro can be changed to a stroke of up to 55 mm.  Contact us for further details.

Manitou Mezzer pricing, details and specifications are available here.
Manitou Mara Pro pricing, details and specifications are available here.
Manitou Mara Inline pricing, details and specifications are available here.
Hayes Dominion A4 brake pricing, details and specifications are available here.

Demo is only available to New Zealand customers.
Contact us for availability in case demos are out with other customers.

Terms & Conditions apply - see below.

Learn More

Replacement schrader air valve stem, cap & core
Fits Manitou McLeod, Mara Pro & Mara Inline rear shocks
23.5 mm overall length, M6 x 0.5 metric threads

Manitou Part Code: 142-31535-K026

Learn More

Replacement seals for Manitou Mara & McLeod rear shock dual air can
This is a secondary kit with seals for outer sleeve only and does not include main air seals

Manitou Part Code: 142-31535-K035 Learn More

MILO (Manitou Integrated Lock Out) complete kit
Remote lever, cable & shock mounted cable-stop to convert Manitou McLeod or Mara Inline to remote compression adjustment
Lever included is two position.  Can be used with other levers.

Manitou Part Code: 142-31535-K027 Learn More

Air can seals for Manitou Mara & McLeod rear shocks
Fit single and dual (king) can
Kit includes quad ring, wiper seal, top-out bumper, glide rings and backup ring
Manitou Part Code: 142-31535-K002

Additional static seals for the outer layer of the dual (king) can are available here

Learn More

Flanged bushings for shock eyelets
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc

Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tight

Alternative is over here

Learn More

MILO (Manitou Integrated Lock Out) lever kit for rear shock or repair
Kit includes 2 position handle-bar lever, cable & cable housing
Manitou Part Code: 141-31975-K003

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.  Available with shock eyelet pressing or complete custom fitted shock hardware.

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
1/2" ID x 1/2" Wide.  
Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware

Learn More

Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. 

Learn More

0 to 300 psi Manitou Part Code: 85-4162 Learn More

Keychain tool for rear shock service Manitou Part Code: 83-2694 Learn More

Original Manitou decal to fit Mara standard can
Black with grey, silver & red (Manitou logo)

Decal measurement = 57 mm height x 135 mm width

Manitou Part Code: 29-37594-G002 Learn More

Original Manitou decal to fit Mara standard can
Black with grey, silver & red (Manitou logo)

Decal measurement = 64 mm height x 135 mm width

Manitou Part Code: 29-37594-G003 Learn More

Original Manitou decal to fit Mara king can
Black with grey, silver & red (Manitou logo)

Decal measurement = 56 mm height x 150 mm width

Manitou Part Code: 29-37595-G001 Learn More

Original Manitou decal to fit Mara king can Black with grey, silver & red (Manitou logo)

Decal measurement = 63 mm height x 150 mm width

Manitou Part Code: 29-37595-G002 Learn More

Original Manitou decal to fit Mara king can
Black with grey, silver & red (Manitou logo)

Decal measurement = 76 mm height x 148 mm width

Manitou Part Code: 29-37595-G003 Learn More

Manitou Part Code: 142-37512-K037 Learn More

Manitou Mara Generation 1 Inline rear shock with Shockcraft Ready Mix Tune
This Gen 1 model is on run-out with limited sizes available.  Gen 2 has the full metric range.

The Mara Inline is light and simple rear shock that fits almost everything and can be rebuilt at home

The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you.  With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness.  The shock will be stable, supportive and suck up the bumps.  You'll feel huge changes in feel, speed and confidence.  There is also a choice of Trail or XC feel.

Learn More