Pistons

Air piston for Manitou 30mm forks. 
Including R7, M30 & Markhor
New design from 2020 using a quad-ring seal.

Manitou Part Code 141-33383-K001 Learn More

Machete & Marvel ISO air piston
28.2 mm OD, 18 mm tall
M6 threaded puller hole on top
Orange anodised
Use with ISO compression rod (domed top) only
Manitou Part Code: 141-28131-K015
Replacement seal: 141-28131-K022

Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Manitou 32mm TS air piston
28 mm OD.
13mm recess for TS Air shaft.
White plastic
New design uses a quad-ring seal.

Manitou part code: 141-33383-K002

Learn More

2007 Minute/Marvel Comp TS air piston
28 mm OD, 13.5 mm tall
13mm recess for TS Air shaft.
Gold or Blue anodised
Manitou part code: 83-3188
Replacement seal: 141-28131-K022

Learn More

Minute/Marvel/Machete TS air piston
28 mm OD, 16.5 mm tall
M6 threaded puller hole on top, 15mm recess underneath.
Gold anodised
Manitou part code: 141-27988-K012
Replacement seal: 141-28131-K022

Learn More

Manitou Axel Trace 2006 air piston.
25.4 mm OD

Manitou Part Code: 85-5580 Learn More

Replacement air piston for Manitou Black/Skareb forks One piece, over-moulded part Approximately 24.8 mm OD New Old Stock (NOS) Manitou Part Code: 85-5266 Learn More

31 mm Pro and Expert piston assembly with seal and Slickoleum assembly grease
Replacement air piston for Manitou Mattoc, Magnum (2015-17) & Mastodon forks with Dorado Air spring system (valve underneath by axle)
Upgrade air piston for 2014 Mattoc forks which had the piston with the single white glide-ring
Manitou Part Code: 141-30996-K023

Learn More

29 mm piston assembly with seal and glide-rings
Replacement air piston for Manitou Mattoc Comp & Magnum Comp (2015-17) & Mastodon Comp forks with Dorado Air spring system (valve underneath by axle)
Upgrade air piston for 2014 Mattoc Comp & Magnum Comp forks which had the piston with the single white glide-ring
Manitou Part Code: 126-27479-L001

Learn More

Piston Band glide ring for Dorado 2009-2018
Blue turcite
16 mm OD
2.8 mm tall
Manitou Part Code: 072334

Piston not included (Manitou Part Code: 072331-F002)

Learn More

Piston Band glide ring for all Pro Cartridge rebound forks
White PTFE 16 mm OD, 2.8 mm tall
Manitou Part Code: 129-27542-L150

Piston not included (Manitou Part Code: 126-27209)

Learn More

Rebound Piston for Dorado 2009-2018
Blue aluminium 15 mm OD, 8.8 mm tall
12 holes
Manitou Part Code: 072331-F002

Turcite Glide Ring not included (Manitou Part Code: 072334)

Learn More

Rebound Piston for all Pro Cartridge rebound forks
Blue aluminium 14.3 mm OD, 7 mm tall
18 holes
Manitou Part Code: 126-27209

PTFE Glide Ring not included (Manitou Part Code: 129-27542-L150)

Shockcraft modified High Flow pistons (rebound & mid valve) are also available
The High Flow pistons greatly increase oil flow on sharp impacts and on very rough ground at speed, increasing reaction speed, removing high speed harshness and allowing more compression damping to be run.

Learn More

Rebound Piston with PTFE Glide Ring for all Pro Cartridge rebound forks.
Blue aluminium 14.3 mm OD, 7 mm tall
18 holes
Manitou Part Code: 126-27209

PTFE Glide Ring
Manitou Part Code: 129-27542-L150

Learn More