Fork Parts

Hexlock SL Axle 150 mm
Fits Manitou Mastodon Fat Fork

Manitou Part Code: 141-33147-K004 Learn More

20 mm Hex-lock through axle for Minute/Drake/Circus 2008+, Dorado 2009-2019
Also fits 2006+ Manitou Travis
Interchangable with 83-2966
Hex measures 21.7mm A/F non-disc side and 18.3mm A/F disc side.
Cap thread M14 x 1.0mm
Silver Colour with Black cap.

Manitou Part Code: 141-23995

Learn More

Shockcraft's internal seal kit for 30 mm Manitou Xvert forks
Fits 2000-2001 Xvert forks

Shockcraft Part Code:  KSMAN30AX Learn More

Bushing set for replacement/repair of 30 mm Manitou forks
Fits Black, Minute (2004-05), R7, M30 & Markhor forks
Requires specialist tools to install and size
Manitou Part Code: 85-5321

Learn More

Air piston for Manitou 30mm forks. 
Including R7, M30 & Markhor
New design from 2020 using a quad-ring seal.

Manitou Part Code 141-33383-K001 Learn More

Replacement lower leg bushings for all Manitou 32 mm forks Manitou Part Number: 141-27181-K007 Learn More

Fits 32 mm stanchioned Manitou forks
Flangless type for 32 x 42 mm pocket
Require a seal driver to install

Kit includes 2 low friction SKFseals, 2 foam rings and Slickoleum grease
Special compound for low friction & extreme low temperature performance

Would suit; R7, Machete, Circus, JUNIT, Marvel, Match, Minute
Also fit older 32 mm forks - Nixon & Shermans

Manitou Part Code: 141-38117-K016

This kit supersedes 85-5293
Learn More

Lower Legs for Minute/Marvel/Drake/Match/Circus 2008+ forks
32mm stanchions for 26" wheel.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
10mm spring side bolt.
Matte Black colour.
Manitou Part Code: 83-3323

Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus 26"
32 mm stanchions 26" wheel size
Not compatible with 2003-07 32 mm Manitou forks due to shorter stanchions and lower castings post 2008
Compatible with 1.5" steerer due to brace being furthur from the crown
20 x 110 mm through axle (axle not included)
Seals and bushings installed
74 mm 160 mm disc mount
8 mm spring side bolt
Gloss Black colour
Manitou Part Code 141-23994-K025 Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus 26"
32 mm stanchions  26" wheel size
Not compatible with 2003-07 32 mm Manitou forks due to shorter stanchions and lower castings post 2008
Compatible with 1.5" steerer due to brace being furthur from the crown
9 x 100 QR dropouts
Seals and bushings installed
74 mm 160 mm disc mount
8 mm spring side bolt
Gloss Black colour
Manitou Part Code: 141-27988-K018 Learn More

Lower Legs for Minute/Marvel/Drake/Match/Circus 2008+ forks
32mm stanchions for 26" wheel.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
9x100 QR dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
10mm spring side bolt.
Light Blue colour.
Manitou Part Code: 83-3292

Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus
32mm stanchions.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Compatible with 1.5" steerer due to brace being furthur from the crown.
QR15x100 through axle (axle included)
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
Matte Black colour.
Manitou Part Code 141-30658-K004

Learn More

T-section seal & two backup rings
Fits 32mm fork air pistons with TS Air or ISO Air pistons.
Approx 28mm stanchion ID.

Manitou Part Code: 141-28131-K022

Learn More

Circus CSA Expert 26 80/100 AST Gloss Black (Manitou)
Non Boost 32mm tubes 300 mm long with M30x1.0 threads top and bottom.
Expert level with 7000 series straight wall stanchions and hollow forged crown
1.12.5" straight steerer and all black with gloss crown

Manitou Part Code: 141-27220-K019 Learn More

Circus CSA Expert 26 130 1.5T Gloss Black (Manitou)
Non Boost 32mm tubes 330 mm long with M30x1.0 threads top and bottom.
Expert level with 7000 series straight wall stanchions and I beam crown
1.5" tapered steerer and all black with gloss crown

Manitou Part Code: 141-27220-K026 Learn More

Circus CSA Expert 26 80/100 1.5T Gloss Black (Manitou)
Non Boost 32mm tubes 300 mm long with M30x1.0 threads top and bottom.
Expert level with 7000 series straight wall stanchions and I beam crown
1.5" tapered steerer and all black with gloss crown

Manitou Part Code: 141-27220-K025 Learn More

27" Non Boost lower leg casting
100x15mm hexlock axle.
Includes bushings and seals.
No axle hardware or stickers.
Matt Black.

Manitou Part Code: 141-30417-K003 Learn More

32mm rebound damper assembly 100-145mm.
Fits Machete JUNIT 24" 2019+, R7 Expert & Machete Comp 2021+

Manitou Part Code: 141-36683-K008 Learn More

Manitou 32mm TS air piston
28 mm OD.
13mm recess for TS Air shaft.
White plastic
New design uses a quad-ring seal.

Manitou part code: 141-33383-K002

Learn More

Valve-cap for Manitou 34 mm forks (Mattoc, Magnum & Mastodon) using IRT, TS or ISO air spring systems
Replacement part or upgrade for early forks using a conventional valve cap
Manitou Part Code: 127-31811

Learn More

Replacement air cap for Manitou Magnum Mattoc & Mastodon Comp forks
Can be used for pressure sensing in all Mattoc/Magnum/Mastodon forks with Dorado Air system (pump connection at bottom of forks)
Can be used to repair damaged cap on Mattoc/Magnum/Mastodon IRT system
Manitou Part Code: 141-32156-K003

Learn More

ABS+ damper with MILO remote lockout kit
Fits 2020+ Manitou R7 Pro, R7 Expert & Machete Comp forks
Threads M29.6x0.8mm.
Can be converted to crown adjust.

Manitou Part Code: 141-38117-K029 Learn More

ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K006

Learn More

ABS+ damper kit for Manitou Circus Expert 32 mm jump forks with alloy legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Red alloy piston is 28mm OD (excluding oring) and fits fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Fitment: M30 x 1.0 mm cap threads, 28 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K007 Learn More

ABS+ compression damper kit for Manitou R7, M30 & Markhor forks.
Fully tunable and revalvable.
25mm green piston and M26.5x1.00mm cap threads.

Manitou Part Code: 141-26532-K001

Learn More