Fork Parts

A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Magnum, Machete, Mattoc, Minute or Marvel QR15 forks.
Axle can be tensioned and removed with a single 6 mm hex key.
Current model is Black.

Manitou Part Code: 141-33147-K001

Learn More

Generation 2 of the Manitou hexlock SL tooled boost axle
Simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Mattoc, Magnum & Machete QR15 Boost forks
Axle can be tensioned and removed with a single 6 mm hex key

Manitou Part Code: 141-33147-K005 Learn More

We have 1x "2nd hand used" axel remaining, please contact us for further information.

20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
Black Colour
Manitou Part Code: 85-5070

Learn More

Lower Legs for Minute/Marvel/Drake/Match/Circus 2008+ forks
32mm stanchions for 26" wheel.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
10mm spring side bolt.
Matte Black colour.
Manitou Part Code: 83-3323

Learn More

Lower Legs for Minute/Marvel/Drake/Match/Circus 2008+ forks
32mm stanchions for 26" wheel.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
9x100 QR dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
10mm spring side bolt.
Light Blue colour.
Manitou Part Code: 83-3292

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 83-3305

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.  29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20 x 110mm through axle dropouts (axle not included)
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 141-23994-K036

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions. 29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.  (use 141-30643-K009 (black) for this application)
Quick Release Dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
Gloss Black colour.
Manitou Part Code: 83-3302

Learn More

Shockcraft's internal seal kit for 32 mm Manitou Stance & Kingpin forks Learn More

Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294

NOTE:  This is not ABS+.  It does not use shim stacks and is not revalvable.

Learn More

Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144

Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006

Learn More

Minute/Marvel/Tower/Machete 2008+ 29" rebound damper assembly 80-120 mm
250 mm overall length, 215 mm steel tube
28.6 mm piston
072037 End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3295

Learn More

32mm rebound damper assembly 100-145mm.
Fits Machete JUNIT 24" 2019+, R7 Expert & Machete Comp 2021+

Manitou Part Code: 141-36683-K008 Learn More

Minute/Marvel/Tower/Machete 2008+ rebound damper assembly 80-140 mm
206 mm overall length, 170 mm steel tube
28.6 mm piston
White End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3341

Learn More

TPC compression damper assembly for 2008+ Minute/Tower/Drake etc
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3143

Learn More

Compression Rod for Tower/Minute 29" 120mm
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Code: 141-29090-K004 Learn More

Valve-cap for Manitou 34 mm forks (Mattoc, Magnum & Mastodon) using IRT, TS or ISO air spring systems
Replacement part or upgrade for early forks using a conventional valve cap
Manitou Part Code: 127-31811

Learn More

Replacement air cap for Manitou Magnum Mattoc & Mastodon Comp forks
Can be used for pressure sensing in all Mattoc/Magnum/Mastodon forks with Dorado Air system (pump connection at bottom of forks)
Can be used to repair damaged cap on Mattoc/Magnum/Mastodon IRT system
Manitou Part Code: 141-32156-K003

Learn More

ABS+ compression damper kit to fit Manitou J-Unit Machete 20" forks.
Includes damper and plastic adjuster knob with retainer screws.
Comp level with pastic knobs and damper piston.
Shorter length than usual 32mm ABS+ dampers.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: J-unit Kids.  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-36683-K009 Learn More

2006 Gold Label Jump Coil Spring Ride Kit
108 lb/in Spring Rate
No paint, just black heat-shrink
Spring 255mm long , 24mm OD

Manitou Part Code: 83-2806 Image indicative only Learn More

2006 Gold Label Jump Coil Spring Ride Kit
80 lb/in Spring Rate
Yellow stripe with black heat-shrink
Spring 255mm long , 24mm OD

Manitou Part Code: 83-2805 Image indicative only Learn More

M8 Flanged foot bolt with o-ring
Fits a range of Manitou forks from 2008 Minute to current day
Included PU O-ring size -010

Manitou Part Code: 067892

Learn More