Fork Parts

Travel spacer for Manitou forks
C-clip design
10 mm total height, 27.9 mm diameter, with internal recess 1 mm each side
Fits 10 mm shafts
Manitou Part Code: 121-29113

Learn More

A simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Magnum, Machete, Mattoc, Minute or Marvel QR15 forks.
Axle can be tensioned and removed with a single 6 mm hex key.
Current model is Black.

Manitou Part Code: 141-33147-K001

Learn More

Generation 2 of the Manitou hexlock SL tooled boost axle
Simpler, lighter and more compact axle to replace the QR15 hexlock in Manitou Mattoc, Magnum & Machete QR15 Boost forks
Axle can be tensioned and removed with a single 6 mm hex key

Manitou Part Code: 141-33147-K005 Learn More

20 mm Hex-lock through axle for Minute/Drake/Circus 2008+, Dorado 2009-2019
Also fits 2006+ Manitou Travis
Interchangable with 83-2966
Hex measures 21.7mm A/F non-disc side and 18.3mm A/F disc side.
Cap thread M14 x 1.0mm
Silver Colour with Black cap.

Manitou Part Code: 141-23995

Learn More

Shockcraft's internal seal kit for 28.6 mm Manitou Axel forks Learn More

Lower Legs for Minute/Marvel/Drake/Match/Circus 2008+ forks
32mm stanchions for 26" wheel.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
10mm spring side bolt.
Matte Black colour.
Manitou Part Code: 83-3323

Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus 26"
32 mm stanchions 26" wheel size
Not compatible with 2003-07 32 mm Manitou forks due to shorter stanchions and lower castings post 2008
Compatible with 1.5" steerer due to brace being furthur from the crown
20 x 110 mm through axle (axle not included)
Seals and bushings installed
74 mm 160 mm disc mount
8 mm spring side bolt
Gloss Black colour
Manitou Part Code 141-23994-K025 Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus 26"
32 mm stanchions  26" wheel size
Not compatible with 2003-07 32 mm Manitou forks due to shorter stanchions and lower castings post 2008
Compatible with 1.5" steerer due to brace being furthur from the crown
9 x 100 QR dropouts
Seals and bushings installed
74 mm 160 mm disc mount
8 mm spring side bolt
Gloss Black colour
Manitou Part Code: 141-27988-K018 Learn More

Lower Legs for Minute/Marvel/Drake/Match/Circus 2008+ forks
32mm stanchions for 26" wheel.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
9x100 QR dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
10mm spring side bolt.
Light Blue colour.
Manitou Part Code: 83-3292

Learn More

Lower Legs for Manitou Minute/Marvel/Machete/Circus
32mm stanchions.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Compatible with 1.5" steerer due to brace being furthur from the crown.
QR15x100 through axle (axle included)
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
Matte Black colour.
Manitou Part Code 141-30658-K004

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 83-3305

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.  29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20 x 110mm through axle dropouts (axle not included)
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 141-23994-K036

Learn More

Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions. 29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.  (use 141-30643-K009 (black) for this application)
Quick Release Dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
Gloss Black colour.
Manitou Part Code: 83-3302

Learn More

Shockcraft's internal seal kit for 32 mm Manitou Stance & Kingpin forks Learn More

Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294

NOTE:  This is not ABS+.  It does not use shim stacks and is not revalvable.

Learn More

Machete CSA Boost 27.5+/29" 90-120 1.5T MB (Manitou)
Boost 32mm tubes 320 mm long with M30x1.0 threads top and bottom.
Comp level with 6000 series tapered stanchions and hollow crown
1.5" tapered steerer and all black

Manitou Part Code: 141-33396-K001

Learn More

Machete CSA Pro 27.5 80/100/120 AST MB (Manitou)
Non Boost 32mm tubes with M30x1.0 threads top and bottom.
Pro level with 7000 series tapered stanchions and hollow crown
1.125" straight steerer and all black

Manitou Part Code:  141-30416-K028 Learn More

Compression Rod for Machete Pro 27.5
Configurable for 80, 100 or 120 mm versions (Manitou)
To be used with ISO air piston (with rubber insert).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Number 141-30418-K023

Learn More

Compression Rod for Machete Pro 90
120 mm version (Manitou)
To be used with ISO air piston (with rubber insert).
Includes stanchion end-cap, top out bumper, bottom-out bumper, negative spring and foot bolt

Manitou Part Number 141-9088-K004 Learn More

Machete & Marvel ISO air piston
28.2 mm OD, 18 mm tall
M6 threaded puller hole on top
Orange anodised
Use with ISO compression rod (domed top) only
Manitou Part Code: 141-28131-K015
Replacement seal: 141-28131-K022

Learn More

Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144

Learn More

Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon

Manitou Part Code: 141-25698

Replacement T-seal for this piston is available here.

Learn More

Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698

Learn More

Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006

Learn More

32mm Pro Rebound Assembly 80-100 mm 27.5" (Manitou)
Fits Manitou Minute/Marvel Pro forks 80-100mm travel 27" wheel size.

Manitou Part Code: 141-30418-K004

Learn More