We have 1x "2nd hand used" axel remaining, please contact us for further information.
20 mm Hex-lock through axle for Sherman/Nixon/Gold-Label/Stance 2003+, Minute 2006 & Dorado 2003-2008
Hex measures 22.8 mm A/F non-disc side and 18.4 mm A/F disc side
Black Colour
Manitou Part Code: 85-5070
20 mm Hex-lock through axle for 2006+ Manitou Travis
Also fits 2008+ Minute/Drake/Circus 2009+ Dorado
Interchangable with 141-23995
Hex measures 21.7 mm A/F non-disc side and 18.3 mm A/F disc side
Cap thread M11 x 1.25mm
Black Colour
Manitou Part Code: 83-2966
20 mm Hex-lock through axle for Minute/Drake/Circus 2008+, Dorado 2009-2019
Also fits 2006+ Manitou Travis
Interchangable with 83-2966
Hex measures 21.7mm A/F non-disc side and 18.3mm A/F disc side.
Cap thread M14 x 1.0mm
Silver Colour with Black cap.
Manitou Part Code: 141-23995
Bushing set for replacement/repair of 30 mm Manitou forks
Fits Black, Minute (2004-05), R7, M30 & Markhor forks
Requires specialist tools to install and size
Manitou Part Code: 85-5321
Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions.
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20x110mm Hex Axle with pinchbolts (axle not included #141-23995).
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 83-3305
Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions. 29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown.
20 x 110mm through axle dropouts (axle not included)
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
White colour.
Manitou Part Code: 141-23994-K036
Lower Legs for Minute/Tower/Drake 2008+ forks
32mm stanchions. 29" wheel size
Not compatible with earlier 32mm Manitou forks due to shorter stanchions and lower castings post 2008.
Not compatible with 1.5" steerer due to brace being closer to the crown. (use 141-30643-K009 (black) for this application)
Quick Release Dropouts.
Seals and bushings installed.
74mm 160mm disc mount.
8mm spring side bolt.
Gloss Black colour.
Manitou Part Code: 83-3302
Platform compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated platform with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3294
NOTE: This is not ABS+. It does not use shim stacks and is not revalvable.
Lockout compression damper assembly for 2008+ Minute/Tower/Drake etc
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3144
Replacement piston for Manitou Minute/Tower forks with MARS air coil system
27.1 mm OD (measured across blue glide ring)
Also fits Manitou Nixon
Manitou Part Code: 141-25698
Replacement T-seal for this piston is available here.
Minute/Tower Pro MARS air piston
27 mm OD, 18.5 mm tall
M6 threaded puller hole on top
Blue anodised
Manitou Part Code: 141-30416-K023
Replacement Seal: 141-28131-K023
Supersedes 141-25698
Minute/Marvel/Tower/Machete Pro 120 mm cartridge rebound damper
Cartridge rebound damper assembly with 16 mm piston and reduced oil volume/weight
Used in Pro models
100-120mm travel only
29" wheel only
Manitou Part Code: 141-29090-K006
Minute/Marvel/Tower/Machete 2008+ 29" rebound damper assembly 80-120 mm
250 mm overall length, 215 mm steel tube
28.6 mm piston
072037 End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3295
Minute/Marvel/Tower/Machete 2008+ rebound damper assembly 80-140 mm
206 mm overall length, 170 mm steel tube
28.6 mm piston
White End-Cap with M30 x 1mm thread
Manitou Part Code: 83-3341
TPC compression damper assembly for 2008+ Minute/Tower/Drake etc
Shim stack piston with adjustable LSC (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 28 mm
Cap threads M30 x 1.0 mm
Manitou Part Code: 83-3143
Lockout compression damper for Manitou Black 2003-4 forks.
24mm piston, M26x1.0mm cap threads
Also fits Manitou Skareb. Same as 85-5868 but smaller thread.
Manitou Part Code: 85-5298
Preload adjuster & cap for Manitou Black 2003-4 and other forks.
Thread M26 x 1 mm. Plastic knob, plastic cap.
Note image is not exact match.
Manitou Part Code: 85-4837
Coil compression rod with air assist for Manitou Black Comp & Elite 2005-2006 Forks.
80-100-120 mm fixed travel. Quad-Ring sealed for air-assist
Manitou Part Code: 83-2274
Lockout compression damper assembly for Manitou Black 2004-2006 Forks
Crown activated lockout with spring-backed blow-off circuit (predecessor to ABS+)
Comes with knob, springs and detent balls as shown
Piston diameter approx 24 mm
Cap threads M26.5 x 1.0 mm
Manitou Part Code: 85-5868
Air Spring Push-Rod for 2004-6 Manitou Black Super air forks.
For 100mm travel MARS air spring only.
Rod is 115mm total length
Manitou Part Code: 85-4427
Air Spring Push-Rod for 2004-6 Manitou Black Super air forks.
For 120mm travel MARS air spring only.
Rod is 130mm total length
Manitou Part Code: 85-4428