In Stock Forks, Shocks & Droppers

30.9 mm diameter & 185 mm travel version of the 2022 Manitou Jack Dropper Post

Focus on the ride, allow the Jack to hold your saddle exactly where you set it!

The 2022 Manitou Jack dropper post is available in three drop options – 185 mm, 160 mm, and 80 mm – for improved handling when you need it.
Available in 30.9 and 31.6 mm diameters, the Jack includes a Manitou under bar lever which features a cartridge bearing for smooth, precise operation.
To further the smooth operation and setup on the 185 mm and 160 mm post the included 1.1 mm cable with Manitou specific cable head negates the use of the cable clamp, allowing all the cable tension adjustment to be completed on the lever side.
80 mm post use a standard derailleur cable for its lever side adjustments.

Note: photos are of a 31.6 mm/160 mm 2022 Manitou Jack dropper post

1 only available at this special price
Learn More

Manitou R8 Pro 29" 44 mm offset fork with Deuce Remote Lockout

The Manitou R8 is an elite XC fork, built to be ridden harder and perform better than anything else in its class.  It meets every need of the most demanding XC athlete

R8 Key Features
•   Rigid & Stiff - larger diameter of legs (34 mm) and Manitou's "rear facing for better racing" arch design provide maximum rigidity
•   Lightweight - 1480 g
•   Unparallelled Tunability - XC tuned Dorado Air & VTT Pro-X adjustable damper
•   Versatile - easily internally adjustable travel in 10 mm increments
•   Reliable - improvments for weight & stiffness have been made without affecting structural integrity or reliability; sealed damper with bladder system and Trail Side Relief mean better performance with longer service life
•   Ace/Deuce Remote Options - stackable under bar remote lockout system for fork, rear shock & dropper post

Note on Travel: we will confirm travel setting with you upon purchase and adjust during our pre-sales checks.  Travel internally adjustable 80 to 120 mm.  Travel can be adjusted down further with purchase of more travel spacers.

Note on Availability:
R8 are in stock with Manitou USA with some stocked here at Shockcraft.  If not in stock place your order now to reserve a R8 in our next order from Manitou USA. Learn More

Manitou Mara (Inline) Shock Metric Trunnion 205 x 60 mm
Successor to the rock solid Manitou McLeod
Light enough for XC, tough enough for Enduro.
IPA damper gives 4 compression settings from open to firm.
Single can standard, high volume king can available.

Manitou Part Code: 192-38261-A005 Learn More

Manitou Mara (Inline) Shock Metric Trunnion 185 x 50/55 mm
Successor to the rock solid Manitou McLeod
Light enough for XC, tough enough for Enduro.
IPA damper gives 4 compression settings from open to firm.
Single can standard, high volume king can available.

Manitou Part Code: 192-38261-A004 Learn More

Manitou Mezzer Pro 29" 44 mm offset fork

The Manitou Mezzer is the big single crown fork everyone has been waiting for - an entirely new fork delivering class beating stiffness, weight and performance.
37 mm chassis, 180 mm travel and 27 or 29" wheel sizes.

We also have Mezzers available for demo.  Details and booking are available here.

Available with Shockcraft Ready Mix or Stage2 Tuning (see Related Products)

Learn More

Manitou Mezzer Pro 27.5" 37 mm offset fork

The Manitou Mezzer is the big single crown fork everyone has been waiting for - an entirely new fork delivering class beating stiffness, weight and performance.
37 mm chassis, 180 mm travel and 27 or 29" wheel sizes.

We also have Mezzers available for demo.  Details and booking are available here.

Learn More

Manitou Mara (Inline) Shock Imperial Eyelet 216 x 63 mm (8.5 x 2.5")
Can be extended or reduced as much as desired
Successor to the rock solid Manitou McLeod
Light enough for XC, tough enough for Enduro
IPA damper gives 4 compression settings from open to firm
Single can standard, high volume king can available

Manitou Part Code: 192-30969-A306 Learn More

Manitou Mara GEN 2 Comp Inline Shock Metric Eyelet 230 x 60 mm

Inline design allows shock to shed weight while still offering support and performance for the majority of riding styles
Trail specific tune designed for maximum shock responsiveness, making it perfect for aggressive riding
This tune gives the best feel in open small bump sensitivity; increases compression across the adjuster range to a mid-firm platform that is great for pedalling up technical climbs where traction is balance with pedalling efficiency
Mara Comp Inline has simplified arcitecture compared to the Mara Pro Inline
It lacks rebound detents and different materials have been used, meaning a lower price point

Configured with a new King Can with an active positive/negative system called Balance Groove Technology

Ready Mix Tune - Targeted Tuning
Available with optional Shockcraft Ready Mix Tune.  The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you.  With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness.  The shock will be stable, supportive and suck up the bumps.  You'll notice huge changes in feel, speed and confidence.  There is also a choice of Trail tune for incremental compression or XC tune with firm lockout.

Note on Shock Availability:
Most sizes are in stock with Manitou USA.  Place your order now to reserve a Mara Inline in our next order from Manitou USA.

Shock Stroke Change
There is no charge for stroke change for stock Mara stroke sizes.  e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke. Learn More

This is the first generation 32 mm version of the Manitou JUnits.  We have been able to secure a small number of 20" JUnit Pro 32 mm forks.

A high performance suspension fork for 20" wheeled bikes, bringing performance, speed and safety to younger riders.

The Machete JUnit Pro is the evolution of Manitou's JUnit suspension line.  Building off of the already incredible Machete JUnit Expert, the Pro offers an added level of adjustability with IRT (Infinite Rate Tune).  IRT offers improved small bump sensitivity without sacrificing any mid to late stroke support.  This is especially important for youth riders who can easily be bumped off line by roots and rocks a heavier rider may not even notice.  This fork is a great upgrade for any youth rider looking to have more control on the trail.

20" Machete JUnit Pro is also available for fitment to cargo bikes (details here).

Also available here with 1.5" headset lower cup assembly to adapt Scott Roxter, Trek Roscoe, Avanti Montari and other bikes to fit the tapered steerer of the Manitou JUnit Machete

Learn More

This is a lightly used, ex-demo shock in great condition.
Comes with the Shockcraft Warranty.

Manitou Mara Pro Shock Metric Eyelet 190 x 45 mm Ex-Demo
Can be reduced to 40 mm stroke

The Mara Pro is Manitou's piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.

Manitou Part Code: 192-36851-A020 Learn More

Enduro tech, revised for XC

Designed for the riders that dabble in everything, the Mara is ready for anything.
Manitou's IPA damper features four different positions ranging from an open mode ready to smash rocks to a firm platform mode for those hard climbs and all out double track sprints.
Made with 7050 aerospace-grade aluminum the chassis is both lightweight and durable.

This is the metric eyelet version of the Manitou Mara (Inline).

Available for order now.

Learn More

Manitou Mara Pro Shock Metric Eyelet 230 x 60-65 mm

The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust, High Speed Compression (HSC) adjust, Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.
Dual layer "King Can" air can with selectable volume.
Boxed as 230 x 60mm, internal spacer can be removed for 230 x 65mm or added to reduce stroke.

Manitou Part Code: 192-36851-A023 Learn More

This is a lightly used, ex-demo shock in great condition.
Comes with the Shockcraft Warranty.

Manitou Mara Pro Shock Metric Eyelet 210 x 50 mm Ex-Demo
Can be increased to 55 mm stroke

The Mara Pro is Manitou's piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.

Manitou Part Code: 192-36851-A021 Learn More

Manitou Mara Shock Metric Trunnion 185 x 50 mm

The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric trunnion version (trunnion top, eyelet bottom)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable

Manitou Part Code: 192-36852-A013 Learn More

Manitou Mara Shock Metric Trunnion 205 x 60 mm

The Mara Pro is Manitou's new piggy back heavy duty air shock
Metric trunnion version (trunnion top, eyelet bottom)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable

Manitou Part Code: 192-36852-A015 Learn More

Manitou Mara GEN 2 Comp Inline Shock Metric Eyelet 210 x 50 mm

Inline design allows shock to shed weight while still offering support and performance for the majority of riding styles
Trail specific tune designed for maximum shock responsiveness, making it perfect for aggressive riding
This tune gives the best feel in open small bump sensitivity; increases compression across the adjuster range to a mid-firm platform that is great for pedalling up technical climbs where traction is balance with pedalling efficiency
Mara Comp Inline has simplified arcitecture compared to the Mara Pro Inline
It lacks rebound detents and different materials have been used, meaning a lower price point

Configured with a new King Can with an active positive/negative system called Balance Groove Technology

Ready Mix Tune - Targeted Tuning
Available with optional Shockcraft Ready Mix Tune.  The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you.  With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness.  The shock will be stable, supportive and suck up the bumps.  You'll notice huge changes in feel, speed and confidence.  There is also a choice of Trail tune for incremental compression or XC tune with firm lockout.

Note on Shock Availability:
Most sizes are in stock with Manitou USA.  Place your order now to reserve a Mara Inline in our next order from Manitou USA.

Shock Stroke Change
There is no charge for stroke change for stock Mara stroke sizes.  e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke. Learn More

Custom Built Manitou 32 mm Minute fork
29" QR 100 mm axle
Black lowers & polished crown
80 mm travel
MARS air/coil spring 50 lb/in
TPC lockout damper
1 1/8" aluminium steerer
PM160 brake mount
1697 g
Available with Manitou decals as pictured, either original Manitou chrome or custom colours (see Related Products for more info)

Customisation options available
Available for shipping worldwide Learn More

Custom Built Manitou 32 mm Minute fork
29" QR 100 mm axle
White lowers & polished crown
80 mm travel
MARS air/coil spring 40 lb/in
TPC lockout damper
1 1/8" aluminium steerer
PM160 brake mount
1710 g
Available with Manitou decals as pictured, either original Manitou chrome or custom colours (see Related Products for more info)

Customisation options available
Available for shipping worldwide Learn More

Custom Built Manitou 32 mm Minute fork
26" 20 x 100 mm axle (axle included with fork)
Black lowers & polished crown
100 mm travel
TS Air
TPC lockout damper
1 1/8" aluminium steerer
PM160 brake mount
1650 g
Available with Manitou decals as pictured, either original Manitou chrome or custom colours (see Related Products for more info)

Customisation options available
Available for shipping worldwide Learn More