ABS+ Damper Kits

Damper knob and plate for Manitou ABS+ and TPC dampers.
6mm internal hex
Black anodised aluminium knob and aluminium detent plate
Fits all ABS+ dampers since 2011 and TPC+ from approx 2007
No lever allows full rotation.
Used on Circus forks

Manitou part code:  141-27177-K007

Learn More

ABS+ & TPC compression knob detent spring
Spare part for loss repair.  Located on top of compression assembly under knob.
Fits 3.5mm pocket
6.3mm long, 3mm OD
Sold individually, 2 used in each knob.

Manitou Part Code: 141-26930-K041

Learn More

ABS+ & TPC compression knob detent ball
3.2mm diameter.
Sold individually.

Manitou Part Code: 141-26930-K042

Learn More

Shims, balls & springs for DIY tuning of Manitou ABS+ compression dampers
ABS+ tuning guide can be found here
Manitou Part Code: 141-32511-K001

Learn More

ABS+ damper with MILO remote lockout kit
Fits 2020+ Manitou R7 Pro, R7 Expert & Machete Comp forks
Threads M29.6x0.8mm.
Can be converted to crown adjust.

Manitou Part Code: 141-38117-K029 Learn More

ABS+ Fork compression damper Minute MRD, with alloy knob.
16mm piston for lightweight MRD damper only.

Manitou Part Code: 141-26532-K005 Learn More

ABS+ Fork compression damper kit for Minute/Marvel Expert.
Fits most 32mm Manitou forks from 2007-2019.
M30x1.0 cap threads, red aluminium piston & knob.  Easily tuned.

Manitou Part Code: 141-26532-K010

Learn More

ABS+ Fork Compression Damper with HBO for Minute Pro
Has hydraulic-bottom-out (HBO) for Minute Pro/Expert forks with HBO on rebound shaft.
M30x1.0 threads, blue aluminium piston (27.2mm) for thicker wall stanchions, alloy knob.

Manitou Part Code: 141-31938-K012

Learn More

ABS+ Compression damper kit for Manitou M30 & Markhor forks.  Also fits R7 and some BLACK models.
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Lower priced alternative to R7 ABS+

Manitou Part Code: HB-141-32556-K001

Learn More

ABS+ damper kit to upgrade Manitou Circus Comp 32 mm jump forks with steel legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Gold anodised alloy piston is 29mm OD (excluding oring) and only fits the chromed steel legs, it will not fit alloy stanchion forks.
Jump tune features a lot of compression damping.
Fitment: M30 x 1.0 mm cap threads, 29 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K006

Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and moulded plastic with retainer screws and index balls/springs.
Comp level with plastic knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-31938-K002
Supercedes 141-26532-K002 & 141-25404-K002 Learn More

ABS+ compression damper kit to fit Manitou J-Unit Machete 20" forks.
Includes damper and plastic adjuster knob with retainer screws.
Comp level with pastic knobs and damper piston.
Shorter length than usual 32mm ABS+ dampers.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: J-unit Kids.  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-36683-K009 Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and machined aluminium knob with retainer screws.
Pro level with aluminium knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston; does not fit 2020+ R7 or Machete forks (ABS+ damper 141-38117-K029 fits these forks)
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Shim kit and revalving instructions here.

Manitou Part Code: 141-26532-K013

Learn More

ABS+ compression damper kit for Manitou R7, M30 & Markhor forks.
Fully tunable and revalvable.
25mm green piston and M26.5x1.00mm cap threads.

Manitou Part Code: 141-26532-K001

Learn More

ABS+ compression damper kit to upgrade Manitou 32 mm forks (Minute/Marvel/Machete/Drake/Circus/Tower).
Includes damper and moulded plastic with retainer screws and index balls/springs.
Comp level with plastic knobs and piston.
Fitment: M30 x 1.0 mm cap threads, 27.85-28.9 mm piston
Tune: ABS+ production XC stack (CV-11411-03).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K002  Superceded by Manitou Part Code: 141-31938-K002

Learn More

ABS+ damper kit for Manitou Circus Expert 32 mm jump forks with alloy legs
Includes damper and moulded plastic knob with retainer screws and index balls/springs.
Red alloy piston is 28mm OD (excluding oring) and fits fits the majority of Minute, Marvel, Machete and Circus Expert forks.
Fitment: M30 x 1.0 mm cap threads, 28 mm piston
Tune: ABS+ Jump stack (SC-03092011).  Fully tunable and re-valvable to fit any rider weight or terrain.

Manitou Part Code: 141-26532-K007 Learn More

MILO (Manitou Integrated Lock Out) kit for ABS+ damper used in 2011+ forks
Kit includes 2 position handle-bar lever, cable, cable housing, fork mounted cable stop, return spring, ABS+ damper cap and screw
Will adapt any ABS+ fork damper to remote (handlebar) lockout operation
Manitou Part Code: 141-26896

Learn More