Manitou Mara GEN 1 Pro

This is a lightly used, ex-demo shock in great condition.
Comes with the Shockcraft Warranty.

Manitou Mara Pro Shock Metric Eyelet 210 x 50 mm Ex-Demo
Can be increased to 55 mm stroke

The Mara Pro is Manitou's piggy back heavy duty air shock
Metric eyelet version (not trunnion mount)
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable.

Manitou Part Code: 192-36851-A021 Learn More

The Mara Pro is Manitou's piggy back heavy duty air shock
Imperial, Metric Eyelet and Metric Trunnion versions available
Rebound adjust
High Speed Compression (HSC) adjust
Low Speed Compression (LSC) adjust
Selectable platform (work/party) switch
Fully tunable

Note on Shock Availability:
The Mara Pro Generation 1 shocks are on run-out pricing.  Sizes available as shown.

Shock Stroke Change
There is no charge for stroke change for stock Mara Inline stroke sizes.  e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke.

Shock Length Modification
We also change shock length of new Mara Inlines at no additional charge.  e.g. we can change a 190 x 50 mm to 185 mm x 45 mm. Learn More

Mara Pro Piggy Back Reservoir (short)
70mm total length, 24.3mm ID
Fits Manitou Mara Pro shocks.  15mm shorter than the long vesion
Can be used to increase frame clearance on 230/205x65mm shocks

Manitou Part Code:  142-37512-K026 Learn More

SKF Flexible IFP for Manitou Mara Shocks
For 24.3mm bore, 14mm tall.
Fits Mara metric inline and Pro piggy back shocks
Do not use on McLeod, insufficient internal space.

Manitou Part Code:  142-37512-K025 Learn More

Valve Core Removal Tool
Screwdriver type for removing schrader valve cores.
Works on forks, shocks and schrader tyre valves.

Shockcraft part code:  T-SCHRADER-CORE Learn More

Mara Pro Piggyback Compression Assembly (Manitou)
Valve body assembly for replacement or tuning.
Fits Manitou Mara Pro piggyback shocks.

Manitou Part Code:  142-37512-K027 Learn More

Air Can Volume Spacer Kit
Fits all Manitou McLeod & Mara King Can (dual can) shocks.
Each ring is 1.15cc volum reduction
5 rings per kit.

Part number: 142-37512-K039 Learn More

Manitou Part Code: 142-37512-K037 Learn More

Manitou Mcleod & Mara travel spacer kit
Contains 5 mm aluminium anti-rattle spacers for 10 mm inline and 12 mm Pro shocks
Contains 2.5 mm plastic spacers for 10 mm inline and 12 mm Pro shocks.

Manitou Part Code:  142-37512-K042

Learn More

Rockshox fork & shock pump 600 psi max (SRAM)

SRAM Part Code:  00.4315.023.030 Learn More

Replacement schrader air valve stem, cap & core
Fits Manitou McLeod, Mara Pro & Mara Inline rear shocks
23.5 mm overall length, M6 x 0.5 metric threads

Manitou Part Code: 142-31535-K026

Learn More

Replacement seals for Manitou Mara & McLeod rear shock dual air can
This is a secondary kit with seals for outer sleeve only and does not include main air seals

Manitou Part Code: 142-31535-K035 Learn More

Air can seals for Manitou Mara & McLeod rear shocks
Fit single and dual (king) can
Kit includes quad ring, wiper seal, top-out bumper, glide rings and backup ring
Manitou Part Code: 142-31535-K002

Additional static seals for the outer layer of the dual (king) can are available here

Learn More

Flanged bushings for shock eyelets
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc

Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tight

Alternative is over here

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.  Available with shock eyelet pressing or complete custom fitted shock hardware.

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
1/2" ID x 1/2" Wide.  
Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware

Learn More

Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. 

Learn More

0 to 300 psi Manitou Part Code: 85-4162 Learn More

Keychain tool for rear shock service Manitou Part Code: 83-2694 Learn More

Original Manitou decal to fit Mara Pro reservoir
Black with grey & silver

Decal measurement = 33 mm height x 70 mm width

Manitou Part Code: 29-37596-G001 Learn More

Original Manitou decal to fit Mara Pro reservoir
Black with grey & silver

Decal measurement = 45 mm height x 70 mm width

Manitou Part Code: 29-37596-G002 Learn More

Original Manitou decal to fit Mara standard can
Black with grey, silver & red (Manitou logo)

Decal measurement = 57 mm height x 135 mm width

Manitou Part Code: 29-37594-G002 Learn More

Original Manitou decal to fit Mara standard can
Black with grey, silver & red (Manitou logo)

Decal measurement = 64 mm height x 135 mm width

Manitou Part Code: 29-37594-G003 Learn More

Original Manitou decal to fit Mara king can
Black with grey, silver & red (Manitou logo)

Decal measurement = 56 mm height x 150 mm width

Manitou Part Code: 29-37595-G001 Learn More