Swag

Treat someone who loves to ride with a gift voucher from Shockcraft.
Vouchers can be used for purchase online (enter as discount code in cart) and/or for fork, shock or dropper service.
Valid for 1 year from date of purchase.
Vouchers are sent via email, either to your email address or to a selected recipient.
You can also print or forward the gift voucher to your intended recipient.
Only for use in Shockcraft's New Zealand retail store.
International customers can purchase these vouchers in NZD and use them to purchase in NZD on our New Zealand retail store. Learn More

Vinyl Shockcraft decal, perforated so you can see through them
Clear laminated to stay clean
1 metre wide, 25 cm high
Perfect size for Isuzu Dmax, Holden Colorado, Ford Ranger, Mazda BT50 etc
Come with easy to follow application instructions Learn More

Treat someone who loves to ride with a Suspension Service Voucher from Shockcraft.
This service voucher can be used towards a Shockcraft suspension or dropper post service or tune.
Note that suspension/dropper services can be more than $250.  This voucher can be used to value up to $250.
Valid for 1 year from date of purchase.
Vouchers are sent via email, either to your email address or to a selected recipient.
You can also print or forward the gift voucher to your intended recipient.
Only for use in Shockcraft's New Zealand retail store. Learn More

Green stem cap with laser etched Shockcraft logo Fits bikes with 1 1/8" steerer Includes star washer, bolt & rubber cap Learn More

Vinyl Shockcraft decal
11 cm by 3 cm
Free with orders over $100 Learn More

Vinyl Shockcraft decal
21 cm by 6 cm
Free with orders over $200 Learn More

30.9 mm diameter & 185 mm travel version of the 2022 Manitou Jack Dropper Post

Focus on the ride, allow the Jack to hold your saddle exactly where you set it!

The 2022 Manitou Jack dropper post is available in three drop options – 185 mm, 160 mm, and 80 mm – for improved handling when you need it.
Available in 30.9 and 31.6 mm diameters, the Jack includes a Manitou under bar lever which features a cartridge bearing for smooth, precise operation.
To further the smooth operation and setup on the 185 mm and 160 mm post the included 1.1 mm cable with Manitou specific cable head negates the use of the cable clamp, allowing all the cable tension adjustment to be completed on the lever side.
80 mm post use a standard derailleur cable for its lever side adjustments.

Note: photos are of a 31.6 mm/160 mm 2022 Manitou Jack dropper post

1 only available at this special price
Learn More

Custom Hardware for fitting a Manitou Mara GEN 1 Inline Air shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and Manitou Mara Inline 230 x 60 mm

Resulting combination bolts straight in.  The Manitou Mara Inline in stock form has firm 4 stage compression damping and is suited to XC style riding.  We recommend a piggy back shock for more aggressive riders (Mara Pro).  Tuning for your weight and riding style is also available.

Please contact us to confirm availability

Learn More

Manitou Mara Pro Gen2 Air shock with conversion kit to fit a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Mara Pro Shock, Shockraft Lift Kit with conversion pin.
Optional tuning and heavy duty bolt kit.

Resulting combination bolts straight in.  The Manitou Mara Pro has adjustable HS & LS comprssion and is suited to all riding styles.  Tuning for your weight and riding style is also available - details here

Please contact us to confirm availability

Learn More

Custom Hardware and shock stroke modification to fit a Manitou Mara GEN 1 Inline to a Trek Remedy or Slash with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
This conversion allows fitment of a Manitou Mara Inline 230 x 60 or 65 mm air shock
Optional travel reduction on the shock to 57.5 mm and fitting custom shock pins.

Resulting combination bolts straight in.

Learn More

Application: Wheel Hubs
ID: 10 mm, OD: 26 mm, W: 8 mm Learn More

Application: Wheel Hubs
ID: 15 mm, OD: 32 mm, W: 9 mm Learn More

Application: Wheel Hubs
ID: 8 mm, OD: 22 mm, W: 7 mm Learn More

Application: Wheel Hubs
ID: 10 mm, OD: 22 mm, W: 6 mm Learn More

Application: Wheel Hubs
ID: 12 mm, OD: 24 mm, W: 6 mm Learn More

Application: Wheel Hubs
ID: 20 mm, OD: 37 mm, W: 9 mm Learn More

Application: Wheel Hubs
ID: 1/4" (6.4 mm), OD: 5/8" (15.9 mm), W: 0.196"
Imperial bore Learn More

Application: Wheel Hubs
ID: 3/8" (9.5 mm), OD: 7/8" (22.2 mm), W: 9/32"
Imperial bore Learn More

Black stem cap with laser etched Shockcraft logo Fits bikes with 1 1/8" steerer Includes star washer, bolt & rubber cap Learn More

Application: Wheel Hubs
ID: 12 mm, OD: 21 mm, W: 5 mm Learn More

Mezzer Pro complete fork (Matte Black colour) with Shockcraft Ready Mix Tune

The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you

Learn More

Manitou Mara Generation 1 Inline rear shock with Shockcraft Ready Mix Tune
This Gen 1 model is on run-out with limited sizes available.  Gen 2 has the full metric range.

The Mara Inline is light and simple rear shock that fits almost everything and can be rebuilt at home

The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you.  With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness.  The shock will be stable, supportive and suck up the bumps.  You'll feel huge changes in feel, speed and confidence.  There is also a choice of Trail or XC feel.

Learn More

The Manitou Mezzer is the big single crown fork everyone has been waiting for - an entirely new fork delivering class beating stiffness, weight and performance.
37 mm chassis, 180 mm travel and 27 or 29" wheel sizes.

Available for order now.  If not in stock please contact us and we can advise ETA.

We also have Mezzers available for demo.  Details and booking are available here.

Note on Travel: we will confirm travel setting with you upon purchase and adjust during our pre-sales checks.  Travel internally adjustable 140 to 180 mm.  Travel can be adjusted down further with purchase of more travel spacers.

Ready Mix Tune
Available with optional Shockcraft Ready Mix Tune.  Select both tuning kit & labour and we'll Ready Mix Tune your Mezzer Pro.  The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you.  This tuning system gives you compression and rebound damping matched to your weight, bike, terrain and riding style.  It includes a custom high flow rebound piston and reshimmed compression and rebound damping. Learn More

Designed for the riders that do everything, the Mara is ready for anything
Manitou's IPA damper features four different compression positions ranging from an open mode ready to smash rocks to a firm platform mode for those hard climbs and all out sprints
Made with 7050 aerospace-grade aluminum the chassis is both lightweight and durable
Imperial Eyelet, Metric & Trunnion sizes available up to 65mm stroke.

Ready Mix Tune - Targeted Tuning
Available with optional Shockcraft Ready Mix Tune.  The Ready Mix Tune is our Pick & Mix Self Tune with the picking, mixing and install already done for you.  With the Ready Mix Tune you will get the right combination of playfulness, poppiness and plantedness.  The shock will be stable, supportive and suck up the bumps.  You'll notice huge changes in feel, speed and confidence.  There is also a choice of Trail tune for incremental compression or XC tune with firm lockout.

Note on Shock Availability:
The Mara Inline Generation 1 shocks (excluding Imperial sizes) are on run-out pricing.  Sizes available as shown.

Shock Stroke Change
There is no charge for stroke change for stock Mara Inline stroke sizes.  e.g. if we have a 210 x 50 mm shock in stock but you need a 210 x 55 mm shock there is no charge to change the stroke.

Shock Length Modification
We also change shock length of new Mara Inlines at no additional charge.  e.g. we can change a 190 x 50 mm to 185 mm x 45 mm. Learn More