Cane Creek

Flanged bushings for shock eyelets
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc

Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tight

Alternative is over here

Learn More

X-Fusion Flanged bushings for shock eyelets
Straight replacement for genuine Fox flanged bushings provided the pin isn't worn
Installed as a pair with o-rings (not included) for repair

If you have a worn pin causing a knock, then use the green versions which have a tighter ID

Learn More

Application: Cane Creek rear shock eyelets that require 12.7 mm x 14.7 mm x 12.7 mm bushings ID: 12.7 mm, OD: 14.7 mm, W: 12.7 mm Learn More

Application: Cane Creek rear shocks that require 16 mm OD bushings ID: 12.7 mm, OD: 16 mm, W: 12.7 mm Learn More

Application: Cane Creek IS42 Headsets
36 x 45 degree ACB
ID: 30 mm, OD: 41.8 mm, W: 6.3 mm
Zinc coated steel Learn More

ID: 40 mm, OD: 52 mm, W: 6.5 mm
Stainless Steel Learn More

Kitsuma is a strong, gravity-first shock that allows you to go faster thanks to a more personalized tune.  With the increased ground-tracking sensitivity of a coil spring and the most damper oil of Cane Creek's entire shock family, it offers amazing downhill performance and maximum possible grip. 

The Kitsuma shocks are available via the New Zealand supplier and lead time is usually a few days
Other sizes also available
Contact us to confirm availability

Learn More

Cane Creek Progressive VALT lightweight coil spring
Designed to be as light as possible without sacrificing action or durability
High quality steel
Progressive-Rate
Inner diameter 36.5 mm
Fits all Cane Creek coil shocks as well as Manitou, Marzocchi, XFusion, BOS, and DSP
Fox coils shocks can be fitted with these springs when installed with a spring clip adapter

These springs are available via the New Zealand supplier and lead time is usually a few days
Contact us to confirm availability
Learn More

Tigon - the Air-Charged Coil Shock

Tigon is an entirely new DB Twin Tube shock that combines the sensitivity of a coil shock with the tunable support of an air spring – to fuel your most creative and playful riding yet

The Tigon shocks are available via the New Zealand supplier and lead time is usually a few days
Other sizes also available
Contact us to confirm availability Learn More

Cane Creek VALT lightweight coil spring
Designed to be as light as possible without sacrificing action or durability
High quality steel
Inner diameter 36.5 mm
Fits all Cane Creek coil shocks as well as -Manitou, Marzocchi, XFusion, ELKA/MRP, BOS, and DSP
Fox coils shocks can be fitted with these springs when installed with a spring clip adapter

These springs are available via the New Zealand supplier and lead time is usually a few days
Contact us to confirm availability
Learn More

Cane Creek +3mm Crown Race 52/40mm

Alloy

Cane Creek Part Code: BAA0855K

Learn More

Cane Creek +6mm Crown Race 52/40mm

Alloy

Cane Creek Part Code: BAA1078K

Learn More

Cane Creek DB Air Schrader Valve Kit
Fits Double Barrel Air shocks  M8 x 0.8 mm thread.
Includes valve stem, valve core, o-ring and cap.

Cane Creek Part Code: AD1010

Learn More

Damper body tube for Cane Creek Double Barrel Air
For 216x63 and 222x75mm sizes.  102.4 mm total length
Black anodised replaces AAD0181
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent

Cane Creek Part Code:  AAD1687 Learn More

Air spring rebuild kit for Cane Creek Double Barrel rear shocks
Kit includes air can seals and seals & backup rings for air piston & seal head
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: BAD0241

Learn More

Air spring rebuild kit for Cane Creek Double Barrel rear shocks
Kit includes air can seals and seals & backup rings for air piston & seal head
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: BAD0241

Learn More

Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: AAD0054 Learn More

Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent

Cane Creek Part Code: AAD0054 Learn More

Gas seal plug for Cane Creek Double Barrel rear shocks
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: DB11115

Learn More

Oil Seal Head Assembly V2 for Cane Creek Double Barrel Inline rear shocks
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: AAD1804

Learn More

Air spring rebuild kit for Cane Creek Double Barrel Inline Air Spring Rebuild Kit
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: BAD1185

Learn More

Coil Damper Seal Head Assembly V2 for Cane Creek Double Barrel Inline rear shocks
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: AAD11738

Learn More

Diaphragm for Cane Creek Double Barrel Inline rear shocks
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: AAD1223

Learn More

Replacement damper shaft for Cane Creek Double Barrel Inline rear shocks
84mm length for 200x56mm etc
Available only with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: AAD0463

Learn More

Spring clip for Cane Creek Double Barrel rear shocks
Available individually or with Shockcraft Service
Shockcraft is an approved Cane Creek service agent
Cane Creek Part Code: DB11246K

Learn More