Marzocchi

Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide. 

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.  Available with shock eyelet pressing or complete custom fitted shock hardware.

Learn More

Flanged bushings for shock eyelets
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc

Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tight

Alternative is over here

Learn More

X-Fusion Flanged bushings for shock eyelets
Straight replacement for genuine Fox flanged bushings provided the pin isn't worn
Installed as a pair with o-rings (not included) for repair

If you have a worn pin causing a knock, then use the green versions which have a tighter ID

Learn More

Harder wearing upgrade for Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets.
1/2" ID x 1/2" Wide.  
Pre-tensioned bushing to accomodate small variations in eyelet diameter and shape without binding or play Available with shock eyelet pressing or complete custom shock hardware

Learn More

Fox 36 Rhythm 2019+ and Marzocchi Z1 NA2 air shaft assemblies
Use for repair or travel change
Fit F36 Rhythm 2019 & later forks with NA2 air system and 1.275" (32.4 mm) stanchion ID
These shafts have a smaller diameter piston and a different base-plate to the Fox 36 NA2 2018-20 air shaft assemblies

Sizes ordered in from supplier upon customer order.  Usually available approx 2-3 days lead-time.

Learn More

Fork service kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
Kit fits Marzocchi 30 mm Bomber forks 1996-2002

See related products for information on components in the kit Learn More

Fork service kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.

See related products for information on components in the kit Learn More

Fork service kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
Kit fits Marzocchi 35 mm Bomber forks 2005-2016

See related products for information on components in the kit Learn More

Fork service kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
Kit fits Marzocchi 38 mm Bomber forks 2009-2016

See related products for information on components in the kit Learn More

Fork service kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
Kit fits Marzocchi 40 mm Monster forks 1999-2006

See related products for information on components in the kit Learn More

Fox 40 & Marzocchi Bomber 58 Stanchion Tube (Fox)
Black anodised Finish
Fits damper side and NA2 air spring.
Can fit earlier coil spring forks with base-plate adaption.

Fox Part Code:  208-01-144 Learn More

All tuning and upgrade options fork for Fox 34, 36, 36 E-bike, 38, 40 & Marzocchi Z1 GRIP or GRIP2 dampers and forks:

Application:
2021+ F34, F36, F38, F40 forks with GRIP2 VVC damper & NA2 air spring
2018-2020 F36 forks with GRIP2 damper & NA2 air spring.
2017+ GRIP or GRIP2 damper in F34, F36, F38 or F40
2019+ Marzocchi Z1 GRIP forks

Send us your fork or damper and we will modify and tune it to your weight and riding style.  This service removes harshness, increases support and brings a live and playful feel.  Increasing both support and compliance.

Includes labour, machining, new parts, consumables and fluids for dampers in good working condition.
Excludes repairs & any additional repair parts

Want a new tuned GRIP2 damper?
You can also purchase a new tuned GRIP2 damper.  Information and pricing is over here. Learn More

Fox Service Set 2021 36 GRIP2 Cartridge - 180mm VVC HSR / LSR / HSC/ LSC (Fox)
Also fits Marzocchi Z1 2019+ forks
Complete damper assembly with adjuster knobs for repair, upgrade or tuning

Available stock or with Shockcraft tuning

Fox Part Code:  820-18-335-KIT

Learn More

Purchase a new GRIP2 damper with Shockcraft Matrix Tune to upgrade your Fox 34, 36, 38 or 40, or Marzocchi Z1 2019+

Our Matrix Tune & Unharsh Modifications for these dampers are for your weight, bike geometry and riding style.  We remove harshness, increase support and compliance, while providing a lively playful feel.

Pricing & Availability
This product is a new Fox GRIP2 damper, with tuning & modifications, which includes labour, machining, new parts, consumables and fluids

Fox F36 GRIP2 damper fits the Marzocchi Z1 2019+ forks

GRIP2 Dampers are ordered in from the NZ Supplier as required.  Lead time for F36 and F38 GRIP 2 dampers is usually 2 days.  F34 and F40 GRIP2 dampers are not usually stocked by the NZ Supplier and would need to be ordered in once your order is confirmed.  ETA is 30 to 90 days.

Rockeater Tune
We also have our Rockeater Tuned Fox GRIP2 dampers, info here.

Want your existing GRIP/GRIP2 damper tuned?
You can also send us your existing Fox GRIP/GRIP2 damper or fork for tuning, see Related Products for info Learn More

Purchase a new GRIP2 damper with Shockcraft Rockeater Tune to upgrade your Fox 34, 36, 38 or 40, or Marzocchi Z1 2019+ fork

The Rockeater Tune is a preconfigured set of modifications and internal tuning which is targeted at 70-80 kg riders who like to ride rough stuff fast without getting beaten
They have enough range to also work great for riders from 60-90 kg
But even outside those limits they're better than anything you'll find factory

The Rockeater Tunes are based on our Matrix & Custom Tune series, incorporating Unharsh Modifications where needed.  But it's simpler.  There are no calculations or data needed.  We will service, install and dyno test to make sure it's running perfectly.

As the Rockeater Tunes are a one-size-fits-all upgrade, they provide the same performance and improvements for any future owners, preserving your investment.

Pricing & Availability
This product is a new Fox GRIP2 damper with a Rockeater Tune, which includes labour, machining, new parts, consumables and fluids

GRIP2 Dampers are ordered in from the NZ Supplier as required.  Lead time for F36 and F38 GRIP 2 dampers is usually 2 days.  F34 and F40 GRIP2 dampers are not always stocked by the NZ Supplier and may need to be ordered in once your order is confirmed.  ETA is usually 2 days if in stock locally, 30 to 90 days if not in stock at supplier.

Matrix Tune
If you want the full experience of a Matrix Tuned Fox GRIP2 damper we still have these too.  Information and pricing is here.

Want your existing Fox GRIP/GRIP2 damper tuned?
You can also send us your existing Fox GRIP/GRIP2 damper or fork for tuning, see Related Products for info Learn More

Ariete fork seal kit to fit Marzocchi 30 mm stanchioned forks Learn More

Ariete fork seal kit to fit Marzocchi 32 mm stanchioned forks Learn More

Ariete fork seal kit to fit Marzocchi 35 mm stanchioned forks Learn More

Ariete fork seal kit to fit Marzocchi 30 mm stanchioned forks

Fits 66 & 888 forks from 2008 Learn More

Ariete fork seal kit to fit Marzocchi 40 mm stanchioned forks.

Fits all Monster T forks. Learn More

Use Marzocchi 40 mm Fork Seal Kit (ARIETE)

Fork seal kit for Marzocchi 40 mm stanchioned forks
Fits all Monster T forks Learn More

Marzocchi Bomber CR Coil Shock
3 simple adjustments - coil spring preload, low speed compression and rebound damping
Set-and-forget design prioritizes suspension performance, ride quality and durability
Affordable, easy to tune and like all Marzocchi products, it’s bomb proof

Marzocchi Bomber CR coil shocks are ordered in from the NZ supplier upon customer order.  Usually available approx 2 days lead-time.
Other sizes also available, please contact us for availability

Learn More

Service and repair options for 2020+ Marzocchi Bomber CR Coil Shocks & 2011+ Fox Van R and RC Coil shocks (with or without compression adjust)

Pricing includes oil, internal seals, gas plug and Shockcraft piggy back sticker.  Additional pricing for repair parts,  damage repair, wiper seal, OEM seal kits, OEM stickers etc. 

Spare parts, shafts, springs and pivot hardware are usually available but may incur small delays due to the large number of sizes.

Learn More

Service, upgrade and tuning options for 2020+ Marzocchi Bomber CR Coil Shocks & 2011+ Fox Van R and RC Coil shocks (with or without compression adjust)

Excludes repairs & any additional repair parts
Excludes springs and pivot hardware

Damper Upgrades & Tuning
Send us your rear shock and we will custom tune it to your weight and riding style.
This modification replaces the main piston and all shim stacks inside the shock.  Replacing the harsh base-valve conical washers with custom designed metric shim stacks.  The shock is then tuned to fit your bike, your weight and riding style.  Making this shock fun and predictable without harshness & lag.  Increases both support and compliance.

Only available from Shockcraft.
Includes calculations, labour, upgrade parts, consumables and fluids for rear shocks in good working condition.

Learn More