RockShox

Flanged bushings for shock eyelets
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc

Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tight

Alternative is over here

Learn More

X-Fusion Flanged bushings for shock eyelets
Straight replacement for genuine Fox flanged bushings provided the pin isn't worn
Installed as a pair with o-rings (not included) for repair

If you have a worn pin causing a knock, then use the green versions which have a tighter ID

Learn More

Can be trimmed down in length to replace the lower sliding bushing in Reverb seat-posts Learn More

SKF Low Friction Fork Seal kit for RockShox 32 mm forks

42mm OD version which fits the majority of RS 32mm forks until 2017.  Except RS Bluto, SID B1 (2017+), Sektor C1 (2019+), Sektor Silver A2/TK B1 (2017+)RS1, Reba A7 (2018) etc requiring a smaller diameter (41mm OD) flangeless seal. Learn More

34 mm Foam Ring Pair
6.5mm tall.
Fits 34mm forks from Manitou & Fox

Shockcraft Part Code:  S-FOAMRING-34PAIR Learn More

Rockshox 15W50 air can lube bubble pack
For use in Rockshox rear shock air cans. Learn More

Free option to cut down the wait time for customers dropping off & collecting their fork, shock or dropper post.

Normally you would book your fork, shock or dropper post for a Shockcraft service and get it in to us when you can.  We service parts in the order that they arrive.  In busy times this can mean up to a month with a bike in pieces and no riding.

With our new Book Now, Drop Later option you can keep your place in the queue and we tell you when we need your fork, shock or dropper.  This is a free service for those dropping in and collecting their service parts (if you are too far away to drop off/collect then you can use our Book Now, Send Later service).  This can bypass much of the downtime.

See our Terms & Conditions below. Learn More

Normally you book your fork, shock or dropper post for a Shockcraft service and send it when you can.  We service parts in the order that they arrive.  In busy times this can mean up to a month with a bike in pieces and no riding.

With our new Book Now, Send Later option you can keep your place in the queue and we tell you when we need your fork, shock or dropper.  Use our Carrier Kereru (Pigeon) Pickup service and we'll organise courier collection.  This can bypass much of the downtime.

Only require one Book Now, Send Later per group of service parts sent together.

See our Terms & Conditions below. Learn More

Kit for bleeding charger 1 dampers in 2014-2017 RockShox, Pike, Lyrik & Boxxer forks

Learn More

SKF seal head upgrade/replacement for RockShox charger 1 dampers
Fits Pike, Lyrik & Boxxer forks, both RC & RCT3 with Charger 1
Upgrade for early Pike forks built with Trelleborg seal head.
Replacement part for seal head on later model Pike, Lyrik & Boxxer forks

SRAM Part Code: 11.4015.353.030 Learn More

Clamp block for servicing RockShox Charger 1-2.1 fork dampers
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
6 clamp sizes - 9 to 22.2 mm

Shockcraft Part Code:  SC-CLAMP-RS-CHARGER-1-2.1-V1 Learn More

Clamp block for servicing RockShox Reverb dropper Posts
Designed and manufactured by Shockcraft
CNC machined from aluminium for a solid clamp with no scratching
4 clamp sizes - 7 to 31.6 mm

Shockcraft Part Code:  SC-CLAMP-RS-REVERB-V1 Learn More

Spare pair of 8 mm crush washers for RockShox & Fox forks Protect lower legs from foot nuts/bolts These are sacrificial and should be replaced whenever fork foot nuts/bolts are removed Learn More

Spare Pair of crush washer retainers for RockShox forks. Fits with 8mm crush washers Learn More

The nature and cost of service depends on the specific dropper post model, it's unique issues and prior maintenance schedule.  Model specific pricing is available from our Pricing page by selecting your dropper post model.  If your model is not included please see pricing below.

If you're not sure what type of service is required please contact us or we can make a recommendation after inspection of the dropper post.  Repair work is additional to a normal service.  We will always call and discuss before proceeding with any repair work.

These rates are for labour only and exclude repair.
Parts, oil & freight are additional and vary depending on the brand & model and the problems found.

Learn More

Rockshox Dynamic Seal Grease tube.
Approx 10g of green grease in a mini squeeze tube
For use in Rockshox rear shock air cans

Equivalent grease (and what we use in the Shockcraft suspension workshop): Slickoleum Learn More

Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance.  Cures issue of friction and stiction to improve small bump control.  Also reduces break-in time of a new fork to zero.
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.

Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

Learn More

Labour for replacement or resizing of fork bushings to fix looseness, knocking or play.  Includes burnishing to final size.

Available immediately for 28.6 mm, 30 mm, 32 mm, 34 mm, 35 mm, 36 mm, 37 mm, 38 mm and 40 mm forks.  Other sizes will have a slight delay as we manufacture tooling.

Note wiper seals need removed for this service and almost always require replacement.

Price excludes cost of replacement bushings.
Price shown is for labour when lower legs are removed from fork and provided dry
If whole fork is provided then minimum additional labour will be Lower Leg Service labour, as per pricing here

Learn More

34mm fork seal installation tool.
Made from firm plastic and does not damage the seal or the fork housing.

Size of the tools corresponds to the stanchion diameter and are compatible with flangeless and flanged seals. Learn More

35 mm fork seal installation tool
Made from firm plastic and does not damage the seal or the fork housing

Size of the tools corresponds to the stanchion diameter and it is compatible with flangeless and flanged seals Learn More

36mm fork seal installation tool.
Made from firm plastic and does not damage the seal or the fork housing.

Size of the tools corresponds to the stanchion diameter and are compatible with flangeless and flanged seals. Learn More

37mm fork seal installation tool.
Made from firm plastic and does not damage the seal or the fork housing.

Size of the tools corresponds to the stanchion diameter and are compatible with flangeless and flanged seals. Learn More

38mm fork seal installation tool.
Made from firm plastic and does not damage the seal or the fork housing.

Size of the tools corresponds to the stanchion diameter and are compatible with flangeless and flanged seals. Learn More

40 mm fork seal installation tool.
Made from firm plastic and does not damage the seal or the fork housing. Learn More

Fork service & upgrade kit containing fork seal kit, fork oil, Slickoleum assembly grease & oil syringe.
Service kit works for all internals (air, coil, TTX22, STX22, TTX18 etc etc).
Optional high flow piston kit works for TTX22 and STX22 versions only.

Learn More